My Volk ME's came in, but...
#16
Pole Position
Thread Starter
Join Date: Apr 2006
Location: Houston, Texas
Posts: 219
Likes: 0
Received 0 Likes
on
0 Posts
well, now that ya'll have me concerned about the +35 offset, I went ahead and mounted them w/o wheels (I put a wooden block under the rim).
The rear:
The front:
The rear looks tight, ...almost dead even with the fender line. The front, again, is a +43 w/ a 5mm spacer (making it a +38).
Thoughts?
Greg
The rear:
The front:
The rear looks tight, ...almost dead even with the fender line. The front, again, is a +43 w/ a 5mm spacer (making it a +38).
Thoughts?
Greg
#19
Originally Posted by glilly
conekiller, those ME's couldn't be that bad to clean, just a few more spokes than the stock rims. And the OZ Superlegerra's were a pretty open spoke design. The Superturismo, now that wheel would be a pain!!!
#23
Pole Position
Thread Starter
Join Date: Apr 2006
Location: Houston, Texas
Posts: 219
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by slowandlow
thoes are similar to my rims
meh, not really, ...one looks like an expensive forged wheel, the other like a cast Discount Tire wheel.
#24
Originally Posted by glilly
meh, not really, ...one looks like an expensive forged wheel, the other like a cast Discount Tire wheel.
Maybe go with Dunlops or Falkens. They are thinner & narrower than the BFG in same size.
#25
Pole Position
Thread Starter
Join Date: Apr 2006
Location: Houston, Texas
Posts: 219
Likes: 0
Received 0 Likes
on
0 Posts
Update: Mackin will be sending over the Face 2 ME with a +45 from Japan, (3-4 weeks). Iguess that's better than having to have them made and wait the normal 60-90 days. However, this delay got me thinking of other wheels, ...heck I even called D2 to see what they had.
On another note, if anyone is interested in the 19 x 9.5 ME Face 1 (+35), I can let these go for cheap (per Mackin), ...and they will discount the price on the 19x8 for the fronts (in stock).
Soooo, ...as I wait, I get to stare at my tires, springs and soon the exhaust.
Greg
On another note, if anyone is interested in the 19 x 9.5 ME Face 1 (+35), I can let these go for cheap (per Mackin), ...and they will discount the price on the 19x8 for the fronts (in stock).
Soooo, ...as I wait, I get to stare at my tires, springs and soon the exhaust.
Greg
#27
Pole Position
Thread Starter
Join Date: Apr 2006
Location: Houston, Texas
Posts: 219
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by ATSOU
Those BFG tires are too fat.....u'll rub with the specs u have.
Maybe go with Dunlops or Falkens. They are thinner & narrower than the BFG in same size.
Maybe go with Dunlops or Falkens. They are thinner & narrower than the BFG in same size.
Greg
Thread
Thread Starter
Forum
Replies
Last Post
D2-AUTOSPORT
Wheels, Tires & Brakes Forum
19
04-04-05 02:18 PM