Lighting mods
#618
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
if u search in this thread it actually tells u step by step. once u unscrew u pull it down a little then u pull it towards you after the hooks in the back are off then u pull down to get those white tabs off. its a pain but this will let u change the dome and the reading lights. i used a credit card to get the plastic off as it was easier for me when the unit is actually on my lap doin it then usin the card to pry it up top. was difficult for me that way but hey if u can pry it up top then u will save time.
#619
Lead Lap
Join Date: Jan 2008
Location: Toronto, Ontario, Canada
Posts: 509
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
yeah thats what i meant, i wasn't sure how to exactly unhook those hooks, but i felt resistance, so i gave up before i broke something. then realized u can pop the lens itself off instead, haha. i think dont think a credit card has enough rigidty to pop the lense, i used a plastic trim removal tool.
#624
Lexus Champion
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
i apologize ahead of time for this noob question.
to take out the headlight housing completely, do i need to take off the fender, bumper? or nothing at all, just the screws.
i tried before, but seems like a big part of our headlights are beneath the fender
to take out the headlight housing completely, do i need to take off the fender, bumper? or nothing at all, just the screws.
i tried before, but seems like a big part of our headlights are beneath the fender
#625
Lead Lap
Join Date: Jan 2008
Location: Toronto, Ontario, Canada
Posts: 509
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
i believe u need to take off the bumper otherwise u can't reach the 3 10mm holding the headlight housing in
#627
Lexus Fanatic
#628
Lexus Champion
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
what do you mean just a cover? if you're referring to the mass amount of plastic pieces in the engine bay, then yes, i've taken those off plenty of times and put them back on (just to see how it looks under). but i havent taken off the entire front bumper yet.
is that what i need to do though?
is that what i need to do though?