isolexus

Nice set up Ill post pics next week of mine with 18in mrr's

MoLexus

Where in Arlington? What color is your IS......

gassman

18s are just fine! The C6R races with 18s on the corners. IMO they look as good or better than 19s. Just checkin how your front spacers worked out. Sent a PM.

cajunboy

i use to live on matlock and green oak. I was driving the crystal white is350. I am now staying in sarasota Fl.

AZ IS350

Iso, which MRR wheels? I have the HR2's in 18" on mine.

MoLexus

Big move......Do you still have the IS 350?

MoLexus

I saw a guy with a white GS 300 on MMRs HR1s. They looked perfect on that car.

cajunboy

yes, drove 1200miles to florida.

sorry to hi jack the thread.

Solomoan

Dallas, SoCal, Arizona, Florida where the weather is moderate and the roads good. In the midwest, with our snow/ice/potholes, I've found the 19's to be too little protection for the rims, and thus have scarred up a $1000 set of Falken's. Am going back to 18's in the spring.

isforme

Looks good, nice price. Can you tell me the offsets.

Gernby

iTrader: (1)

I listed the offsets in the first post, but here they are again.

Front: 18x8" -40 mm offset
Rear: 18x9" -35 mm offset

BTW, I recently replaced my OEM rears with a lower profile tire (255/35-18), and it looks and fits a lot better. The reduced diameter also gives a 3.7% increase in torque to the ground.

isforme

Sorry. Thanks for answer.
¿In front, the 40mm includes the 5mm added with spacer?
Sorry again if I hammering you. Best regards

caymandive

iTrader: (2)

Looks really good! Any weight savings with this wheel over the stockers?

Gernby

iTrader: (1)

I don't know how they compare to stock in regard to weight.

The 40 mm offset does not include the 5 mm spacer. With the spacers, I'm running -35 mm all the way around.

krookid

I noticed it has been asked a couple of times but I didn'tsee an answer, did the tpms fit these wheels?