Flipsonic

Reading from other threads, it looks that the only hard part is removing the rubber hanger. Any suggestions so it doesn't become a headache? Anything else I should know about the DIY? Thanks.

lexusgabro

if you need pics for exhaust install....you probably shouldn't be doing it yourself ............only two bolts

Flipsonic

I edited my original post. It sounds easy enough. Yup I don't need pics.

ben_r_

Really? Is it really that easy to do? I would like to upgrade my exhaust as I see a lot of CL owners changing theirs and selling them here but Im worried about it costing too much to install. Do you have to have the car on a lift or can you reverse it onto ramps? Seriously though, no one has done DIY with some pics on this?

ULTiMaX99

iTrader: (5)

maybe spraying some wd-40 on the hangers?

IS250 4 Me

https://www.clublexus.com/forums/sho...d.php?t=273629

Check out the thread above. There are some pics. Ramps are sufficient as long as you aren't so big that you can't fit underneath.

Flipsonic

So how much do the bolts need to be tightened?

lexusgabro

tightened to 43 Nm

t.is350.h

iTrader: (3)

to remove exhaust hanger, some wd40 or soap would be fine.