9006 nokya bulbs
#16
Lexus Fanatic
iTrader: (10)
Join Date: Nov 2004
Location: Under an IS F since 2008
Posts: 13,441
Received 1,064 Likes
on
586 Posts
No, there is a few threads on it i think??
Drivers side is easy because there is an access panel... 2 minutes
The passenger side takes a bit longer.. I actually un-fastened 3 clips and two bolts to get the bumper to un-clip from the one side, underneath the headlight..
From there getting to the bulb was easier.. 10-15 mins with out rushing.
Not sure why Lexus just didn't put an access panel on the passenger side as well...
I guess that would have made more common sense..
Drivers side is easy because there is an access panel... 2 minutes
The passenger side takes a bit longer.. I actually un-fastened 3 clips and two bolts to get the bumper to un-clip from the one side, underneath the headlight..
From there getting to the bulb was easier.. 10-15 mins with out rushing.
Not sure why Lexus just didn't put an access panel on the passenger side as well...
I guess that would have made more common sense..
#18
Hapaboy, heres the link if you still need it: https://www.clublexus.com/forums/sho...+light+install
JoeZ please keep us updated when you do take a look at the harness.
Thanks
JoeZ please keep us updated when you do take a look at the harness.
Thanks
#19
Yeah it would be good if you inspect your harness once in a while. Even some merchants that were selling the Nokya bulbs told me that they had customers with fried harnesses. They suggested to replace the harness.
BTW OT, what parking lights are you using and are those stock HIDs? It seems to match well.
BTW OT, what parking lights are you using and are those stock HIDs? It seems to match well.
I just put a set in last weekend... I love the look!!
Reminds me of my IS300
Although, I must admit the housing lenses feel very "HOT".. but they just about feel the same as the stock bulbs...
I use my fogs all the time, so next week I'll do a 2 week inspection on the harness to check out the wiring...
I made sure I bought the ones that were "operates at stock wattage" 55W..
For the record our OEM bulbs are Sylvania 9006 51W
The below pic is a bit blurry... I was in a rush when i took them..
This ones better..
Reminds me of my IS300
Although, I must admit the housing lenses feel very "HOT".. but they just about feel the same as the stock bulbs...
I use my fogs all the time, so next week I'll do a 2 week inspection on the harness to check out the wiring...
I made sure I bought the ones that were "operates at stock wattage" 55W..
For the record our OEM bulbs are Sylvania 9006 51W
The below pic is a bit blurry... I was in a rush when i took them..
This ones better..
Thread
Thread Starter
Forum
Replies
Last Post
mo12hammad
IS - 2nd Gen (2006-2013)
14
09-06-09 07:00 AM