is250al

can anyone post some pics on a flawless step by step on putting on red outs?

ben_r_

Its pretty easy man... Just use some soapy water in a spray bottle and you cant really mess it up as long as you buy the precut ones from rvinyl.

is250al

what do you use to press the water out?

SpaceCadet

try a squeegee. i used a credit card and it left scratches

is250al

think a Home Depot would have that?

VikH

iTrader: (5)

Use your fingers and a hair dryer to get the water out.

I used alcohol swabs to clean the area. Soap up the area. Dipped the whole vinyl sticker in a bowl of warm soapy water. Put the sticker on. Align it. Once aligned use a microfiber cloth to dry the area and squeeze the water from underneath the sticker. I used a hair dryer to facilitate the drying. I also folded (they are about 5 mm too wide) the excess over on the insides. Took 10 minutes for both.

Joe Z

iTrader: (10)

Who ever sells you the red outs.. should be able to supply the squeegee, if you ask....

PhilipMSPT

iTrader: (5)

Easier than applying contact lenses...

DrShoe

I just did mine dry. I peeled off the backing and just slapped both of them on. Bubbles will eventually go away unless they are really huge then you most likely messed up.

IS250HuNnY

i think someone posted a thread about this but not sure.. i kind of remember mine coming with instructions when i got them from aerotect but it was a long time ago so i dont really remember..