Anyone know the wheel offset that will have the wheel be flushed to our fenders without needing any mods done for a lowered car since our aftermarket wheel thread stinks because everyone wants to post pictures but not follow the instructions in the first post.

like i wouldn't be able to do anything silly like have offsets as low as 24 would i?

 

What size wheels are you going for? That would be helpful.

And although not everybody posts all of the information in the Wheel thread, you can glean some very useful information from them. I was able to get a pretty good idea of the size/offset combination that I was looking for based on what was posted there.

 

+34 all around should be fine if you are running 19x8.5 and 19x9.5

 

oh sorry

20" rims

probably by 8.5 or 8's in the front and 9.5 or 10's in the back... wrapped in 30 series tires...

 

this is a good question..i would like to know too if anyone can help me also..(not tryin to thread jack you) jus dont wanna double post a thread like this ..but im tryin to go 19x8 or 8.5 in front and 19x10 or maybe 10.5 in the rear..tryin to find the most aggressive offsets that will clear my set up.. ofcourse fender pulling and rolling will be done..TIA

 

it depends on the stretch you have on the tires as well.. heres my suggestion

225/30/20 +28 for the front

235/30/20 +30 the rear

 

i must be silly because im runnin +21 front 19x9 and +23 19x10

 

Wow!! That's very aggressive. You must have some "deep dishes" up front and rear. Have any pictures of your set-up?

 

soon. the wheels are actually being made now and coming in couple weeks. custom made from work and i have to crate it here from japan.

stretch tire, fender roll and some camber. perfect.

 

thats crazy...i dont even think G35 and 350Z run offsets that low and those cars can run some deeeep dishes

 

Welcome to the silly club! Ive ran 19x9 +22 and 19x10 +22 before did a little fender mod and it fit right in and the tires were not even stretched aggressively.
For my next set of wheels .... i think im gonna pull my fender and go with an aggressive stretch and offsets in the high to mid teens. Silly enough?

my friend ran +15 on his 350z he had a 5" lip i think they were ssr professor ms1s

 

i actually own a 350z as well. my buddys runs +5 offset on their 19x9.5 front and +7 19x10.5

my car right now im running +5 front and +10 rear. we 350z guys run pretty aggressive offsets. some guys even run +0 all around.

 

with my works i was ganna go 19x9 +13 R disc and 19x10 +11 O disc but the R disc will not clean bbk. it would have been nice cause my front lip would have been more than 3 inches and rear would have been almost 5 inches.

 

This is IS THUG talk...

Gatta see when you're finished with the project

 

same here