Volt 6000K HID installed...
05-01-09, 10:42 AM
#16
Pole Position
Join Date: Sep 2007
Location: Canada
Posts: 258
Likes: 0
Received 0 Likes
on
0 Posts
well i guess i should amend my post, a friend of mine suggested that it might just be the gasket on the aftermarket bulbs that are making it impossible to install and that i should switch the ones from my halogen bulbs to the xenons.
Tried that and it worked fine
Definitely makes it easier to plug the things in, the gaskets on the volt bulbs are almost twice as large as the ones on the stock halogens.
Tried that and it worked fine
Definitely makes it easier to plug the things in, the gaskets on the volt bulbs are almost twice as large as the ones on the stock halogens.
05-01-09, 04:56 PM
#20
Lexus Test Driver
iTrader: (5)
Join Date: Aug 2008
Location: O.C.
Posts: 987
Likes: 0
Received 0 Likes
on
0 Posts
Hate to revive such an old thread but im now having the exact same issue with a set of Volt HID's i just bought not fitting into my headlamp. Just spent a good part of my night trying to get these things installed but no luck.
I searched CL regarding this issue and came up with this thread... its pretty sad that xenondepot is still having the same problems even after 2 years.
Had i known of the possibility of this I would have spend a bit more and gotten the xtreme kit.
I guess il go to a shop and see if they will modify the ring for me and install the kit hopefully for a reasonable price.
I searched CL regarding this issue and came up with this thread... its pretty sad that xenondepot is still having the same problems even after 2 years.
Had i known of the possibility of this I would have spend a bit more and gotten the xtreme kit.
I guess il go to a shop and see if they will modify the ring for me and install the kit hopefully for a reasonable price.
Well i think i can help... This is just a try. Lol i think the problem with the fitment is because the ring is to big with the volt bulb. What you can do is take out the ring and replace it with the stock ring from your stock bulb. i believe this should work. Hope this helps
05-01-09, 05:01 PM
#21
Pole Position
Join Date: Sep 2007
Location: Canada
Posts: 258
Likes: 0
Received 0 Likes
on
0 Posts
oh thats why it was revived... lol...
Well i think i can help... This is just a try. Lol i think the problem with the fitment is because the ring is to big with the volt bulb. What you can do is take out the ring and replace it with the stock ring from your stock bulb. i believe this should work. Hope this helps
Well i think i can help... This is just a try. Lol i think the problem with the fitment is because the ring is to big with the volt bulb. What you can do is take out the ring and replace it with the stock ring from your stock bulb. i believe this should work. Hope this helps
Thread
Thread Starter
Forum
Replies
Last Post
