Let me, without further ado, present to Club Lexus my 2008 IS350
Thank you CL!
07-23-08, 06:44 PM
#40
Lexus Champion
Thread Starter
This comparision pic is from this main IS-F tail light thread when they came out.
JDM tails on top do NOT have the 4 LEDs found on the USDM side reflectors seen on the bottom (with redouts).
I got mine through L-tunedparts with a GB when they first came out (still overpriced).
You can still get the same JDM ones I got from them for ~$670 a set but I don't know of a GB or promo code.
Sewell also carries these for ~$600, but it seems like the USDM version according to their description "...rear side marker lights feature energy saving Light Emitting Diodes (LEDs)...".
Nice thing with them is that you can use our "CLUBLEXUS" promo code for an additional 15% off!
07-25-08, 01:11 AM
#43
Lexus Champion
Thread Starter
Thanks!!
The mirror turn signals were kinda a PITA to install myself with just wires and no instructions. Luckily, the pioneer of the 2IS led mirror covers (Passnu2)provided a DIY. Bad thing tho was he deleted the pics before I could install them. That left me with just his textual description. 
So then after combining that with some PMs with the guru himself and a couple of hours fishing the wire thru the mirror base(hardest), then thru the door, into the fender, under the hood and into the "power box", I got it to work. A hanger was my best friend for fishing the wire. Then I had to do it for the other side.
There's a recent post with someone running the wires to the driver side door sills, which might be easier. Just gotta know which wires to tap into.
Easily my hardest DIY mod so far, but easily the most rewarding!
Also, today I found out the wheel spacers that were back ordered for 2 weeks officially shipped out today!
The mirror turn signals were kinda a PITA to install myself with just wires and no instructions. Luckily, the pioneer of the 2IS led mirror covers (Passnu2
)provided a DIY. Bad thing tho was he deleted the pics before I could install them. That left me with just his textual description. So then after combining that with some PMs with the guru himself and a couple of hours fishing the wire thru the mirror base(hardest), then thru the door, into the fender, under the hood and into the "power box", I got it to work. A hanger was my best friend for fishing the wire. Then I had to do it for the other side.
There's a recent post with someone running the wires to the driver side door sills, which might be easier. Just gotta know which wires to tap into.
Easily my hardest DIY mod so far, but easily the most rewarding!
Also, today I found out the wheel spacers that were back ordered for 2 weeks officially shipped out today!
