Looks like a pain in the a$$

 

100plus thanks for the info. I did it a couple of weeks ago based on your suggestions.

 

wow.. nice diy write up!!

 

great job on the diy!

 

If I am just replacing the inner grille, do I have to take out the entire outer bezel? Or can I just take out the inner grille with the bezel still in place, then insert the new grille?

I'm hoping this can be done to avoid the possibility of scratching my paint on the bumper.

 

good write up. man you guys are tempting me to get one from sewell.

 

nice write up. I'll be doing this soon when I get my lx mode grille painted! =)

 

Good stuff. This should be my next weekend project. Thanks!

 

I'm going to test your write up right now..

 

Turned out just fine. Thanks for the write up. When pulling the grille towards your chest, watch the clip on the same side you are pulling, its between the bumper and grille on the side. When I noticed that one it was easy to pull the grille free from the bumper.

 

I got a new front emblem for replace.... what should I used to take out the emblem????

 

Nice write up, if only this was available to me before I took mine off! Would have been waay easier.:-)

 

good stuff!! thanks alot!!

 

nice writeup and pics.

so what did u guyz replace the stock grill with?

 

im having a real hard time removing these tabs someone please help me