CalitriSC

iTrader: (13)

Will most of these wheel set ups work with my IS-F? I know I have to clear the larger brakes. Just curious if the offsets will be close.

twenty

iTrader: (3)

Hey guys, any insight on the attached pic? It's my 19x9.5 with a 225/35. It seems like it didn't stretch properly? It's a reverse mount wheel, so that's how I did it.

It's been quite a few years since I worked at a tire shop.. Or am I just seeing things?

twenty

iTrader: (3)

After some further research, it appears this is due to the design of the wheel and there isn't anything to worry about. Is this true?

Mv350

iTrader: (23)

but too high wont clear the the suspension
no, ignore all offsets in this thread, you have an extra 1/2" on each side of the axle. your offsets roughly with be 12-15mm higher
it looks like a 225 on a 9.5, inner barrel of the wheel will appear as if it stetched more on one side.
225/40 on a 18x10.5 left side is the inner barrel right is the face

265/35 on 18x12 right is the inner barrel left is the face

read above, the second picture is a work meister which is reverse mount because of the step lip is has, that tire was a pain in the *** with a 5.5" lip and stepped. you have nothing to worry about these 2 wheels never unbeaded and they are alot more aggressive stretches than 225/35 on 19x9.5"

sr20mofo

iTrader: (10)

what tire size/brand is needed for:

F 19 x 9.5 x +17
R 19 x 10.5 x +22

already have tabs shaved and fenders rolled. ideal drop would be fender sitting flush with tire.

thanks

Mv350

iTrader: (23)

225/35 or 215/35 and 265/30 or 235/35 falkens and nankings will stretch well for that

sr20mofo

iTrader: (10)

i could get away with 225/35 up fronts? really?

im rubbing pretty hard on 19 x 9 x +38 with 235/35 right now

Mv350

iTrader: (23)

its because you have a bigger tire on a narrower wheel. i ran 215/35 on my 9's. and if you dont remove your bumper tab your gunna rub anyway.

Acingteam

iTrader: (2)

I run 215/35 on my 19x8.5 up front. No fender/fender liner mods, car is as low as it'll go on Megan's (car is AWD), only rubs on big bumps or hard turns. The outer rolling diameter is almost identical to stock tires.

pic:

Dimitri

iTrader: (2)

I want to order my wheels tomorrow, but I cannot find the answer to my question! Will the 19x9.5 +30 fit in the front and clear the inner fender? I've seen +22, but that will obviously sit closer to the fender. I just want to make sure I can make these fit without rubbing like my subaru does haha.

Any help would be great because like I said, I want to get these wheels tomorrow. I already know I am getting 19x10.5 +22 rear with 255s

aliu603

iTrader: (18)

^go 265/30 in the back instead of 255/35

projectdna

iTrader: (56)

you mean, you haven't done any fender work?

i have doubts as to whether your proposed specs for the front wheels will clear IF you haven't done any fender work.

Elvis@Vossen

This is one of my favorite threads on here!

steezy

JIAhh yes. I remember someone talking to me about how his 11" width barely cleared his shocks. I forgot who. Offset was high 30s.

UtoyZ

iTrader: (11)

this might sound like a weird question but if i'm planning on putting 225/35 on a 19x9.5 fronts, what size tire should i put in a 19x10.5 to have the same amount of stretch on fronts and backs? TIA