AGGRESSIVE ISX50 wheel thread
#1473
Lead Lap
iTrader: (2)
I posted in the wheel fitment thread but actually the sizes that I was asking about aren't made anymore. This is what I am looking at to see what everyone thinks...
18X9.5 +30
18x10.5 +30
For now I want to be able to run a 235/40/18 and 255/40/18. I will have my fenders rolled and medium drop. This is a daily driver so I don't want to go to crazy with it. What does everyone think?
18X9.5 +30
18x10.5 +30
For now I want to be able to run a 235/40/18 and 255/40/18. I will have my fenders rolled and medium drop. This is a daily driver so I don't want to go to crazy with it. What does everyone think?
#1474
Sooo the +30's won't be made in that offset for a few months...does anyone think I can go +22? I don't want to have to run a lot of negative camber as this is daily driven. Drop wil be about one finger from tire . Thanks.
#1479
#1482
Driver School Candidate
iTrader: (2)
Join Date: Nov 2010
Location: Toronto, ON
Posts: 41
Likes: 0
Received 0 Likes
on
0 Posts
anyone running 19x9.5 +22 have an issue with the tire rubbing AT THE FRONT where the bumper screws into the fender. there is a metal piece of the fender that is rubbing my tire.
any suggestions?
any suggestions?
#1483
Lexus Test Driver
take that screw out, pound the tab up with a hammer, and use a zip tie. OR you can completely shave it and do a quick release.
#1485
Driver
iTrader: (2)
^same as above.
My car goes into the body shop on the 16th for the lip kit and fresh paint on the bumpers. Does anyone have any pictures of what tabs to cut/trim to fit a 9.5/10.5 +25 F/R?
Also, do I need adjustable ball joints for the front and BOTH sets of megan rear arms? I only have the one set that was recommended to me before.
My car goes into the body shop on the 16th for the lip kit and fresh paint on the bumpers. Does anyone have any pictures of what tabs to cut/trim to fit a 9.5/10.5 +25 F/R?
Also, do I need adjustable ball joints for the front and BOTH sets of megan rear arms? I only have the one set that was recommended to me before.