IS - 2nd Gen (2006-2013) Discussion about the 2006+ model IS models

how to safely remove emblems

Thread Tools
 
Search this Thread
 
Old 09-30-08 | 05:49 PM
  #1  
ssmoked's Avatar
ssmoked
Thread Starter
Lexus Champion
 
Joined: Feb 2006
Posts: 2,170
Likes: 97
From: California
Default how to safely remove emblems

i want to remove and rearrange a couple letters on my IS...
anyone got suggestions on how to without damaging the paint

also how to re-glue it back, with what type of safe glue

where is a good place to buy other emblem letters except ebay (dont have an account)

thanks in advance
Old 09-30-08 | 05:53 PM
  #2  
Ta250's Avatar
Ta250
Driver
iTrader: (1)
 
Joined: Apr 2008
Posts: 118
Likes: 0
From: Ga
Default

The lexus letters are one piece I believe. But you can use sticker remover to get them off.
Old 09-30-08 | 06:01 PM
  #3  
montgb's Avatar
montgb
Lexus Champion
iTrader: (7)
 
Joined: Jun 2006
Posts: 4,196
Likes: 5
From: Northern VA
Default

Getting them off is the easy part. The emblems are stuck on with double-sided foam tape. Dental floss is probably the easiest way to separate the emblem from the car, but this will leave a lot of the adhesive & tape on your car. However, it's easy to pull this off. Then you can use an adhesive remover to get the last of the glue.

If you want to re-attach the emblems, you'll need to get the double-sided tape. Check Carson or Sewell for replacement emblems.
Old 09-30-08 | 06:11 PM
  #4  
Faymester's Avatar
Faymester
Lexus Fanatic
 
Joined: Aug 2006
Posts: 7,468
Likes: 0
From: Vancouver, BC
Default

dental floss (wax coated & unflavored) + bug & tar remover (safe for paint & wont reck your wax job)
Old 09-30-08 | 07:13 PM
  #5  
ssmoked's Avatar
ssmoked
Thread Starter
Lexus Champion
 
Joined: Feb 2006
Posts: 2,170
Likes: 97
From: California
Default

if i want separate different letters, where would be the best cheap place to get it...autoparts store??

thanks
Old 09-30-08 | 07:18 PM
  #6  
VikH's Avatar
VikH
Lexus Champion
CL Folding 200000
iTrader: (5)
 
Joined: Apr 2005
Posts: 2,822
Likes: 0
From: IL
Default

Remember the "S" and the "5" have pegs that sit in holes in your trunk.
Old 09-30-08 | 07:39 PM
  #7  
ssmoked's Avatar
ssmoked
Thread Starter
Lexus Champion
 
Joined: Feb 2006
Posts: 2,170
Likes: 97
From: California
Default

Originally Posted by VikH
Remember the "S" and the "5" have pegs that sit in holes in your trunk.
thanks for warning...

do you mean the 'Lexus' or the 'IS' portion, or both
Old 09-30-08 | 08:05 PM
  #8  
VikH's Avatar
VikH
Lexus Champion
CL Folding 200000
iTrader: (5)
 
Joined: Apr 2005
Posts: 2,822
Likes: 0
From: IL
Default

Originally Posted by ssmoked
thanks for warning...

do you mean the 'Lexus' or the 'IS' portion, or both
The "Lexus" badge is a whole piece with 2 pegs that sit in holes. The IS portion has a peg in the "S" and the "5". So if you were going to change anything you would have to fill those holes somehow.
Old 09-30-08 | 08:14 PM
  #9  
gc86's Avatar
gc86
Lexus Test Driver
iTrader: (26)
 
Joined: Sep 2008
Posts: 867
Likes: 3
From: NorCal
Default

Originally Posted by VikH
The "Lexus" badge is a whole piece with 2 pegs that sit in holes. The IS portion has a peg in the "S" and the "5". So if you were going to change anything you would have to fill those holes somehow.
Not sure if its different for each year but my 2006 IS350 had a peg in the S and 0
Old 09-30-08 | 08:39 PM
  #10  
Evitzee's Avatar
Evitzee
Lexus Champion
 
Joined: Sep 2006
Posts: 3,102
Likes: 8
From: Hill Country, TX
Default

If you want to keep the exact spacing go buy a block of Oasis (the foam they use for flower arranging) and press it on the letters before removing them. This will give you an exact spacing impression.
Old 09-30-08 | 10:21 PM
  #11  
2slow's Avatar
2slow
Lexus Champion
iTrader: (5)
 
Joined: Feb 2007
Posts: 3,124
Likes: 4
From: Norcal
Default

I used a hair dryer to heat the double sides tape. I didn't need to use goo-gone or any type of adhesive remover. As for the letters that are free flowing, i had an imprint of the letters and numbers( because my car was dirty)
Old 10-01-08 | 12:10 AM
  #12  
DoHwan's Avatar
DoHwan
Lead Lap
 
Joined: Jul 2007
Posts: 488
Likes: 0
From: CA
Default

before you take off i'd blue tape the area around the letters if you're gonna put them back on. also i'd heat up like 2slow said then if you take them off well enough then you can just reuse the existing tape. if not then just go buy some 3m double sided tape and slap it on and cut off excess. i like to use any card 'cause i think it takes the adhesive part off better than floss does. i hate seeing cars with all the tape around the car 'acuse they wanted to take the letters off but couldn't get the sticky part off.
Old 10-01-08 | 12:13 AM
  #13  
2slow's Avatar
2slow
Lexus Champion
iTrader: (5)
 
Joined: Feb 2007
Posts: 3,124
Likes: 4
From: Norcal
Default

Originally Posted by DoHwan
before you take off i'd blue tape the area around the letters if you're gonna put them back on. also i'd heat up like 2slow said then if you take them off well enough then you can just reuse the existing tape. if not then just go buy some 3m double sided tape and slap it on and cut off excess. i like to use any card 'cause i think it takes the adhesive part off better than floss does. i hate seeing cars with all the tape around the car 'acuse they wanted to take the letters off but couldn't get the sticky part off.
The emblems come with 3m tape behind it so you won't need to worry about that.

I think javy had a post where he had the painters tape as a template and also to protect the paint when he was removing the emblems. Heat it real good and the adhesive left over on the paint will come off easily.
Old 10-01-08 | 03:55 AM
  #14  
montgb's Avatar
montgb
Lexus Champion
iTrader: (7)
 
Joined: Jun 2006
Posts: 4,196
Likes: 5
From: Northern VA
Default

Originally Posted by ssmoked
if i want separate different letters, where would be the best cheap place to get it...autoparts store??

thanks
I'm curious - what exactly do you have planned? That might make it easier for us to make recommendations.
Old 10-01-08 | 05:46 AM
  #15  
VikH's Avatar
VikH
Lexus Champion
CL Folding 200000
iTrader: (5)
 
Joined: Apr 2005
Posts: 2,822
Likes: 0
From: IL
Default

Originally Posted by gc86
Not sure if its different for each year but my 2006 IS350 had a peg in the S and 0
Oops. It might be the 5 or the 0. I forgot


Quick Reply: how to safely remove emblems



All times are GMT -7. The time now is 05:09 AM.