projectdna

iTrader: (56)

those look great. i should know.

i especially like the paint. matches SGM very well.

what are you running up front that's getting you the minimal fender lining rub? if anything, you should be running 225/35-19's up front...

Vscious350

Fantastic execution on the paint scheme... Those wheels are hot!!

acl15

realllllllllllllllll nice. spectrum parking lot?

SoCal35

iTrader: (5)

Yes, I sanded them down, cleaned, filled in the curb rash with some bondo, dried, wetsanded, and then sprayed. 3 coats of Duplicolor wheel paint, and 4 coats of Duplicolor wheel clearcoat. I didn't find it necessary to primer. I'll see in the long run how the paint holds up. So far, so good!

19" Rays G35 wheels offsets are 19x8 +30 up front, 19x8.5 +33 in the back. I'm lowered on Eibach IS250 Springs.

I'm running the stock G35 size up front 225/40/19... they still have some life left so why not. I think I'm gonna heat gun and push the fenders in a little this weekend. Hopefully that helps. When I get a new set of tires, I'll prolly go 225/35/19 in front and 245/35/19 in the rear. Right now the rears are 255/35/19 with no rub (at least I don't think so- haven't heard anything yet).

Yep, Spectrum parking lot.

Thanks for all of the comments everyone. I'm very satisfied with the way the wheels turned out. Even though they seem glossy in the pics, I still need to polish them down as best as I can. There are still few rough feeling spots.

projectdna

iTrader: (56)

if anything, i recommend 225/35-19's in the front and 255/25-19's in the rear, solely to preserve the 2is rolling diameter.

SoCal35

iTrader: (5)

Do you think there's a setup I can use with 245 in the rear?

projectdna

iTrader: (56)

don't get me wrong; 245/35-19's in the rear will work. it's a 1% difference in diameter.

the only reason why i recommend 255/35-19's in the rear is because it is almost identical to the 2is's 18" rear rolling diameter. other than that, there's no other particular reason...

Emarati_K

That's SEEEEEEEEEEEEEEEEXY man

twinturboz

iTrader: (1)

Any idea what your front camber is set at?

JDub23

iTrader: (1)

Love the look! Good job on painting them too.

Jugga

fakin assome

projectdna

iTrader: (56)

my guess is it's probably within factory specs. most 2is aftermarket springs don't lower the 2is past the point where camber is out of factory specs.

and since he's running rims and tires that are exactly or near the same as the original 2is 18" specs, it shouldn't alter alignment specs (unless i'm wrong).

jns350

iTrader: (7)

Fitment looks clean and flushed...color matched very well. Very Nice

ghettoaww

iTrader: (2)

perfect color match

IS-J

iTrader: (1)

Looks super nice, who wouldve ever thought that another makers wheels would look better on another car! Good job