Hid drl
#16
Not me I only put the HID's in the Fogs. I never messed with the DRL. I change the City lights to a blue wedge. I would also like to see this done I am sure you can just run off the wires from the OEM Lights and not have high beams if you wanted. 3 sets of HID lights in the Lexus would light up the road and you would not need high's IMO. So who is up for the challenge
Last edited by sykocus; 11-25-08 at 03:03 AM.
#17
I have the V-LEDs module installed with the wiring harness connected to a set of V-HID 9005 3K HIDs, works perfect and the subdued color of the yellow does not irritate oncoming traffic. Definitely makes you stand out from the rest. Oh and the coating on the bulbs look sic in the reflector of the housing when they're off.
Here are the parts you will need:
1 DRL Module for 9005
1 V-HID wiring harness
1 9005 HID kit your color choice.
All plug n play, no modifications needed.
I am with everyone else running with the high beams on during the day is irritating but add the output of an HID kit on top of it, you're just asking for a beat down.
Here are the parts you will need:
1 DRL Module for 9005
1 V-HID wiring harness
1 9005 HID kit your color choice.
All plug n play, no modifications needed.
I am with everyone else running with the high beams on during the day is irritating but add the output of an HID kit on top of it, you're just asking for a beat down.
#19
MRTUND,do you have any pics of your car and how the lights look? I went to V-leds page and its rather confusing to me as to the proper parts I would need. Below is a link to a pic from their website. Right now,I think I want to mimic the look of that car. I am so confused.
http://www.v-leds.com/Shop/Control/P...id/0/SFV/32481
http://www.v-leds.com/Shop/Control/P...id/0/SFV/32481
Thread
Thread Starter
Forum
Replies
Last Post
scdroptop
SC430 - 2nd Gen (2001-2010)
6
03-25-09 07:53 PM