The "Look what I got today!" Thread
The following 4 users liked this post by RDIS250AWD:
#6591
Already have Apexi exhaust? Lol. I wanted to upgrade to one and downsize as i am divorced now and don’t need all this house. But decided to stay put. Congratulations brother!
#6592
Switching from H&R’s on OEM shocks to these. Went with Fortune’s default spring rates. Only took 5 weeks to receive them. So they’re not too backed up , just in case folks are looking to buy.
The following 2 users liked this post by jreancsu:
bbaugher47 (11-02-23),
istarzan (11-01-23)
#6597
The following users liked this post:
GrizzlyMan (11-18-23)
#6598
I coated the titanium wrap with high-temp silicone to protect it from moisture even though DEI says it's not required for the titanium wrap. I followed the instructions for the silicone which is to apply three coats and heat cure for two hours between coats. I don't daily drive this car and it almost never goes out in the rain, so I think it'll be fine.
The following users liked this post:
istarzan (11-17-23)
#6599
Lexus Test Driver
iTrader: (2)
I'll be sure to let RR Racing know that they should remove it from all their shop cars immediately and take it off their website. I'll also let Design Systems Engineering know that they've been selling a harmful product for years and should stop.
I coated the titanium wrap with high-temp silicone to protect it from moisture even though DEI says it's not required for the titanium wrap. I followed the instructions for the silicone which is to apply three coats and heat cure for two hours between coats. I don't daily drive this car and it almost never goes out in the rain, so I think it'll be fine.
I coated the titanium wrap with high-temp silicone to protect it from moisture even though DEI says it's not required for the titanium wrap. I followed the instructions for the silicone which is to apply three coats and heat cure for two hours between coats. I don't daily drive this car and it almost never goes out in the rain, so I think it'll be fine.
#6600
I'll be sure to let RR Racing know that they should remove it from all their shop cars immediately and take it off their website. I'll also let Design Systems Engineering know that they've been selling a harmful product for years and should stop.
I coated the titanium wrap...
I coated the titanium wrap...
Instead of cheaping out, you should have ceramic coated them.
I have ceramic PPE, put them on and forget. Like seriously, it is nothing new how they will turn out.
More humid than FL
Last edited by GrizzlyMan; 11-18-23 at 11:37 PM.
Thread
Thread Starter
Forum
Replies
Last Post