18" aftermarket wheels on 2IS?
07-28-13 | 07:24 PM
#271
Driver School Candidate
Joined: Mar 2013
Posts: 11
Likes: 0
From: Tn
Update:
Installed coilovers and I an running a 255/35/18 in the back now.
I have -3.1 camber in the back and -2.5 in the front I had to grind my bumper tabs in the front and the rear so I wouldn't rub as bad.
Installed coilovers and I an running a 255/35/18 in the back now.
I have -3.1 camber in the back and -2.5 in the front I had to grind my bumper tabs in the front and the rear so I wouldn't rub as bad.
08-01-13 | 06:33 AM
#277
Rookie
Joined: Aug 2004
Posts: 75
Likes: 0
From: Texas
https://www.clublexus.com/forums/att...-2is-image.jpg
is350nlm:
I really like this front lip. Can anyone tell me who makes it or a link?
is350nlm:
I really like this front lip. Can anyone tell me who makes it or a link?
08-21-13 | 05:33 PM
#281
I am fairly new to the wheel game but I do know what I want to get for my 2IS . WORK Emotion XD9 but i don't know how to set it up . Help ? I don't wanna roll the fenders and I would prefer no rub . I will be going on coils , so if needed , i'll roll the fenders . I'd prefer not to use spacers , so i was going to go with 18x9 f 18x9.5 r , but i don't know the offset i should use , nor the tire size .
09-12-13 | 02:54 PM
#282
Rookie
Joined: May 2013
Posts: 69
Likes: 0
From: TN
i dont get why people say its hard to believe that people are riding on 18s. and that our cars only look good on 19s or 20s. i prefer 18s because i can make my car sit a lot lower than 19s or 20s 
people even tell me my car looks like its sitting on 19s, so i guess not everyone can make 18s work
people even tell me my car looks like its sitting on 19s, so i guess not everyone can make 18s work
09-12-13 | 06:30 PM
#284
Driver School Candidate
Joined: May 2013
Posts: 16
Likes: 0
From: Singapore
Wheel Enquiries
Hi guys, I would like to check what are the specs and offset for 18Inches to flush with the fenders?
I am currently looking at Wedsport SA55, 9J with offset of 36 for the front, 10J with offset 36, will it rubber against the fenders? Tyres ,most probably with front 235/40 and rear 265/35.
I am currently looking at Wedsport SA55, 9J with offset of 36 for the front, 10J with offset 36, will it rubber against the fenders? Tyres ,most probably with front 235/40 and rear 265/35.
Last edited by ahli08; 09-12-13 at 07:23 PM.
The following users liked this post:
isaacrvl88 (03-21-20)