Tangshot

what would i have to do to pull this off? what tire sizes, rolling, pulling, etc? found a good deal on them. I am also lowered on coilovers.

isaacrvl88

1. Any rubbing issues with fender in the rear with 18x9.5 +22?
2. What tire size are you running? Any camber?

KG024

Just got a good deal on these wheels, tried searching the thread for a set up similar to mine with +16 offset in the front but couldn't find anything. I have my fenders rolled and on coils.
SSR ms3 18x9 +16 18x10 +24
Which tire size do you recommend to make this aggressive set up work?

808LSX

MMR VP5
18x8.5 fronts +35mm offset 18x9.5 Rears +40mm offset 225/40/18 Front tires 255/40/18 Rear tires No rubbing whatsoever, lowered on eibach pro kit

buddlo4

Hello guys, need help.

I have a 2008 Lexus is350 and need to know if this setup will work? Square set up.

Anovia Elder Deco Directional 18x9.5 +35
ART105189551143573X

808LSX

rlThe rear will fit.....not the fronts unless your majority stretch your tires, and have major camber.

buddlo4

they sell a +22mm offset version. Would that be better for the front?

Or are you saying for the front that the width is the problem

primavera

9.5" + 35 in front will most likely rub, unless you want to do fender pull and tabs delete.
9.5" +38 would be a better choice, but then it sits too close to the knuckle. The bigger offset the wheel gets closer to the suspension components. Smaller the offset (ET) the wheel gets pushed outside the fender.

Jahseriah

IS this AWD?

Jahseriah

Is this AWD?

808LSX

No its RWD.

StealthIS

Hey I had a question with your 18x9 rims when you had the 225/40/r18 tires was the stretch really bad? I'm trying to decide between getting 225/40/r18 tires or 235/40/r18. Thanks.

sheetmetalfab

Some nice niche 7 spokes fit great.