IS - 2nd Gen (2006-2013) Discussion about the 2006+ model IS models

What do you think of putting F-Sport badges on the side panels?

Thread Tools
 
Search this Thread
 
Old 04-23-09 | 11:54 AM
  #16  
Pnuge88's Avatar
Pnuge88
Lexus Champion
iTrader: (1)
 
Joined: Jan 2007
Posts: 3,348
Likes: 18
From: TX
Default

don't just put the F. put the whole "F sport" emblem on the fenders if you're going to do it
Old 04-23-09 | 12:06 PM
  #17  
CRB's Avatar
CRB
Lead Lap
 
Joined: Jan 2004
Posts: 654
Likes: 0
From: California
Default

Stupid isn't a word I care for, how about a bit flamboyant and pretentious.
Old 04-23-09 | 01:04 PM
  #18  
cliffud's Avatar
cliffud
Former Vendor
iTrader: (3)
 
Joined: May 2003
Posts: 5,700
Likes: 3
From: away from keyboard
Default

i personally wouldn't do it but it's your car.

making your car over-promise what it cannot deliver is, in my opinion, foolish.

unless - you do this as a joke and use a crayon to write "f-sport". then it shows you have a sense of humor!
Old 04-23-09 | 01:47 PM
  #19  
Lexasaurus's Avatar
Lexasaurus
Lexus Test Driver
iTrader: (12)
 
Joined: Feb 2009
Posts: 991
Likes: 0
From: Ohio
Default

Yeah, i have the $5 ebay badge, that looks absolutely terrible on MRM. I think i'm gonna try to put it somewhere inside though. Someone should chop a picture of what it might look like.
Old 04-23-09 | 01:47 PM
  #20  
600rr05's Avatar
600rr05
Lexus Champion
iTrader: (9)
 
Joined: Feb 2008
Posts: 4,095
Likes: 2
From: San Diego, CA
Default

i personally like having the fenders clean but i think if you removed one of the rear emblems and put the F-Sport badge there it would look okay..
Old 04-23-09 | 02:17 PM
  #21  
four o two's Avatar
four o two
Intermediate
iTrader: (1)
 
Joined: Dec 2008
Posts: 326
Likes: 1
From: WA
Default

Sounds pretty ricey. These aren't EK hatches man. It's a Lexus. Save the ricer BS for a Honda.
Old 04-23-09 | 03:14 PM
  #22  
Initial G's Avatar
Initial G
Lexus Champion
iTrader: (38)
 
Joined: Jul 2008
Posts: 3,323
Likes: 0
From: Ca
Default

Do whatever you want, its your car. Post pics when you're done.
Old 04-23-09 | 03:33 PM
  #23  
kickin8's Avatar
kickin8
2IS/2RX/4RX
iTrader: (1)
 
Joined: Feb 2007
Posts: 6,851
Likes: 27
From: SF Bay Area
Default

will look ricey.....
Old 04-23-09 | 04:09 PM
  #24  
SlickRSM's Avatar
SlickRSM
Pole Position
 
Joined: Jan 2009
Posts: 379
Likes: 0
From: NY
Default

Thats like someone putting a "Type R" sticker on their rice burner but I guess the F-Sport is a little classier... Meh just my 2 cents
Old 04-23-09 | 04:28 PM
  #25  
Shoganai's Avatar
Shoganai
Lexus Test Driver
iTrader: (3)
 
Joined: Aug 2006
Posts: 1,319
Likes: 2
From: SoCal
Default

an f-sport emblem would only see the inside of the cabin or engine bay... unless you post pics on how it would actually look on the fender
Old 04-23-09 | 05:01 PM
  #26  
Chino415's Avatar
Chino415
Driver
iTrader: (1)
 
Joined: Mar 2009
Posts: 175
Likes: 0
From: CA
Default

I was also thinking about replacing my IS250 emblems for the F-sport badge but don't know if I have enough F-sport stuff to make that claim, haha. I only have the f-sport front/rear sway bars and the under chassis brace.
Old 04-23-09 | 07:39 PM
  #27  
DaKi3241's Avatar
DaKi3241
Lead Lap
iTrader: (3)
 
Joined: Jan 2009
Posts: 713
Likes: 0
From: SoCal 818
Default

LOL oh boy from these comments....

Well the dealership installed these badges on the fenders for me after doing a full conversion of F-sport items. The only thing I do not have for F-sport is the carbon fiber engine cover.

Hope this helps.

Figured people told me to take them off but... I think i'll just leave it. Don't want to blow dry, use a wire, and goo gone it and etc.

LASTLY don't try putting the badges in the rear. They don't slap on flush. The trunk is not 100% flat for a badge to stick on 100%. The curved trunk is a pain to put things on.

Here are some very old pics I had since I first got the car. As you can see, no roof spoiler, no debadged (lexus of glendale), no liscence plate frame replaced, no red outs, etc.






Last edited by DaKi3241; 04-23-09 at 07:43 PM.
Old 04-23-09 | 07:44 PM
  #28  
SlickRSM's Avatar
SlickRSM
Pole Position
 
Joined: Jan 2009
Posts: 379
Likes: 0
From: NY
Default

Originally Posted by DaKi3241
LOL oh boy from these comments....

Well the dealership installed these badges on the fenders for me after doing a full conversion of F-sport items. The only thing I do not have for F-sport is the carbon fiber engine cover.

Hope this helps.

Figured people told me to take them off but... I think i'll just leave it. Don't want to blow dry, use a wire, and goo gone it and etc.

LASTLY don't try putting the badges in the rear. They don't slap on flush. The trunk is not 100% flat for a badge to stick on 100%. The curved trunk is a pain to put things on.

Here are some very old pics I had since I first got the car. As you can see, no roof spoiler, no debadged (lexus of glendale), no liscence plate frame replaced, no red outs, etc.





I take it back with all the f-sport upgrades it doesnt look to bad That is a lot of info to read on the back of your car!
Old 04-23-09 | 07:53 PM
  #29  
DaKi3241's Avatar
DaKi3241
Lead Lap
iTrader: (3)
 
Joined: Jan 2009
Posts: 713
Likes: 0
From: SoCal 818
Default

Originally Posted by SlickRSM
I take it back with all the f-sport upgrades it doesnt look to bad That is a lot of info to read on the back of your car!
lol yeah. It looks even more decent having f--sport licence plate frame, licence plate, "lexus of glendale" badge crap off. But not 100% clean yet.

Thnx for the F-sport compliment!
Usually people give me crap about it
Old 04-23-09 | 09:25 PM
  #30  
juice14's Avatar
juice14
Lexus Champion
 
Joined: Jun 2008
Posts: 2,297
Likes: 2
From: Ga
Default

looks good to me. im glad you took off the badges , because it was too much. now its better.



All times are GMT -7. The time now is 10:11 AM.