XprincoX

iTrader: (10)

Anyone know where you can get some of the super thin tape for an lexon roof spoiler emblem? It looks like the thin tape on the front of a gfx lip... i don't think the normal foam 3m emblem tape (red backed) is gonna sit flush.

ULTiMaX99

iTrader: (5)

i've never seen any tape that thin besides double-sided scotch tape. maybe you can use some type of glue? krazy glue?

XprincoX

iTrader: (10)

yeah... i've seen anything like that before either... i was thinking about shaving down the 3M foam tape or just glueing it on. But the manufacturers must have gotten the tape from somewhere.

2slow

iTrader: (5)

I think layer of Glue would do the trick. Krazy glue would be my choice, cause it's KRAZY!

acefalcon2

iTrader: (20)

the red and black auto tape which holds 5lbs per sq inch would do... my roof spoiler is hold on by that

XprincoX

iTrader: (10)

im not talking about the spoiler itself... im talking about the lexon emblem that goes on-top of the spoiler lol. The foam auto tape is too thick and won't look flush.

jns350

iTrader: (7)

I would glue that emblem on!!!...as funny as this may seem. Their are ppl out there that would love to snag that emblem off and slap it on their replica spoiler....

Initial G

iTrader: (38)

I don't think double sided tape will be enough to hold the "emblem" on. Someone could just pull it off or it might fall off by itself due to weather conditions (rain) etc.

I would just go with the Krazy glue. It might give you a little more peach of mind than the double sided tape.

XprincoX

iTrader: (10)

yeah but originally it was held on by this thin double sided tape (stock from lexon). But once you remove it it loses its adhesiveness... I guess i'll go with the glue on method with KRAZYYY Glue! lol

acefalcon2

iTrader: (20)

hmm i thought they used an auto tape too

solo_stage

iTrader: (4)

i have some super thin double sided tape, ill cut you a piece

eric_r_ho

iTrader: (9)

Use epoxy!

istundra

iTrader: (2)

Are you serious? Please don't scare me!

Maybe this? not sure if it is strong enough...
http://duckproducts.com/products/det...id=28&plid=609

shadow191

iTrader: (1)

3M does make a very thin double sided tape. It uses the same adhesive as the grey foam tape, but has no foam so essentially it's just adhesive with a backing. I don't know of any auto parts stores that might carry it. I used to be in the dash kit manufacturing business, and we'd source the thin tape for some applications. But we bought it in very large rolls directly from 3M, I've never seen it in the 1/2" widths that you can get the other tapes in. Maybe call a body shop, they often times purchase this stuff.

shadow191

iTrader: (1)

You can't really shave the 3M tape down. It only has adhesive on the contact surfaces, in the middle it's just foam.