Goodbye Wood, Hello Carbon Fiber!
#19
SeOuLiS250,
im not sure lol ... It was slightly dusty from the shipping peanuts that were inside the box, and I just dusted it off with a microfiber cloth and everything came off. The fabric is water/stain resistant, so I believe if you get any liquid on there it will just bead up. Its not a soft material... not porous at all. Plus, food/drinks are not allowed in my car, so Im not worried
Joshg120,
Thanks! In the vendor marketplace section, they have a thread for a GB right now. They sell just the fabric, or you can send the trim pieces to them.
To everyone else,
Thanks for all the comments! It does look great, and for those of you considering it, its a great mod i highly recommend. Goes well with the F-Sport shift **** lol.
im not sure lol ... It was slightly dusty from the shipping peanuts that were inside the box, and I just dusted it off with a microfiber cloth and everything came off. The fabric is water/stain resistant, so I believe if you get any liquid on there it will just bead up. Its not a soft material... not porous at all. Plus, food/drinks are not allowed in my car, so Im not worried
Joshg120,
Thanks! In the vendor marketplace section, they have a thread for a GB right now. They sell just the fabric, or you can send the trim pieces to them.
To everyone else,
Thanks for all the comments! It does look great, and for those of you considering it, its a great mod i highly recommend. Goes well with the F-Sport shift **** lol.
#20
thanks GiantsFan
I might have to replace my CF interior to this,,,lol
does anybody know how this CF would react if I spray a clear coat on it?
to make it little shy??
(sorry for threadjacking GiantsFan)
I might have to replace my CF interior to this,,,lol
does anybody know how this CF would react if I spray a clear coat on it?
to make it little shy??
(sorry for threadjacking GiantsFan)
#21
THis pic is from another thread.
I will now go on to jack this thread back from you
#24
How much did it cost to ship them the pieces and have them do it?
And also,you can ship the pieces without the circuit board and have everything still run while the pieces are being wrapped, but it's more hassle. haha
And also,you can ship the pieces without the circuit board and have everything still run while the pieces are being wrapped, but it's more hassle. haha
#26
#29
I agree with iSuxel. A little patience and your're good to go. The door switches are the easiest part. The center console has to be the hardest part, due to the shifter plate and all the little pieces. Also, its a pain to get all the weaves going in the same direction. The good thing is that everything comes apart making the install a breeze. It's a little fun project and anybody can do it. Heck pay me and I'll do it all day long. hahaha!