pandy_88

iTrader: (2)

i am about to roll my fenders so i can fit 19x9.5 10.5 +22 all around..

how much do i need to roll them out? and what do i say or tell the people at the shops?

sorry first time moddin

D.Jobin

iTrader: (4)

Cut, don't roll.

windex

iTrader: (1)

I agree thats what worked best for me

iSuxeL

iTrader: (21)

I recommend cutting. But it doesn't matter which one you choose it still won't fit, you have to pull. GL.

Noz

iTrader: (5)

You'll have to roll the front and cut and roll/pull the rear if you want to fit those. Just be prepared to repaint your fenders and 1/4 panels cus there's a good chance you'll have to. Not tying to bash or anything... just giving you a fair warning. Hope it all turns out good. Oh... and if the shop has never rolled or even heard of it, DO NOT have them do it. If you take it to an experienced shop, all you need to say is "I want my fenders and 1/4 panels rolled" and they'll know. GL man.

IAMJAVEDG

iTrader: (5)

wow. this takes some *****.

If you can get your fenders cut, and pulled by the right shop, and repainted since it might be necessary... with the right drop you might just grab the title of FLUSHEST 2IS

good luck

FYI: MrMark ran a 19x9 and 19x10 +22 all around with fender mods front and back.. here's what it looks like.. so imagine what you will go through.. you will NEED to pull for sure!

stooky

iTrader: (2)

a cut wont work since i have 9.5 +22 in the rear with a cut and it scrapes still, i agree with dj and isuxel, a cut and pull is probably your best bet

dangy

iTrader: (1)

Roll your fenders and prove them wrong. Im going to roll my fenders soon too. Let me know how it goes.

jonjon83

iTrader: (3)

u do this ur paint will crack, the guys at TWS said that the metal that lexus use is very thin and if u roll it will cause ur paint to crack..prove us wrong go ahead, then post another thread about how u have to repaint ur fenders,

Robs IS250

iTrader: (4)

i can vouch for the thin finders sicne i deal with them everyday

dangy

iTrader: (1)

So your saying not one person on this forum rolled there fenders yet? I actually talked to a couple you will have to be careful. I will prove YOU wrong, I will make my thread and ill call your A** out in it too. Later douche.

ChrISF

whatever you do, make sure you heat before you roll/pull.

Little E

iTrader: (2)

Now now now.....there's no need to get feisty. Simmer down.

stooky

iTrader: (2)

its not like a roll wont work, just the pull has to be slight and not too much. my friend actually had his rolled and in the process flared a little and it looks really good!

jonjon83

iTrader: (3)

ima douche? im tryin to help a guy prevent from crackin his paint, plp have rolled but they have cracked the paint like i said, true it can work but u have to be careful but most posts show that they have cracked the paint or the roll was a crappy job...and in my post i never started name calling but its cool..i love haters..u make ur thread and call me out, ill get shot in a magazine and call u out too..later (f)(a)(g)