How to turn off TRAC/VSC on 2006 IS250?!
#1
Driver School Candidate
Thread Starter
Join Date: Dec 2009
Location: Ohio
Posts: 42
Likes: 0
Received 0 Likes
on
0 Posts
How to turn off TRAC/VSC on 2006 IS250?!
So i work at a Lexus Dealership...and i know in the 2007 + models there is a TRAC button, but in the 2006 250 awd there is no button..i asked one of the techs and he said their should be a button under the dash near my knee, so i checked and didnt see anything...ive been searching online and have yet to find a way! Is it not possible? Thanks.
#2
Lexus Test Driver
iTrader: (1)
Join Date: Aug 2008
Location: Socal
Posts: 1,272
Likes: 0
Received 0 Likes
on
0 Posts
https://www.clublexus.com/forums/is-...-off-vdim.html
this thread is in the 2IS forum FAQ's, you should go thru them and check it out. alot of interesting useful stuff.
FAQ Thread.
https://www.clublexus.com/forums/is-...tart-here.html
this thread is in the 2IS forum FAQ's, you should go thru them and check it out. alot of interesting useful stuff.
FAQ Thread.
https://www.clublexus.com/forums/is-...tart-here.html
#3
Lexus Test Driver
iTrader: (2)
Join Date: Nov 2009
Location: LI, NY
Posts: 981
Likes: 0
Received 0 Likes
on
0 Posts
Do the following within 30 secs of starting the car
1. Make sure the car is in Park and the parking brake is disengaged before you start the car.
2. Start the engine.
3. Engage the parking brake.
4. Fully depress the brake pedal and then release.
5. Fully depress the brake pedal and then release.
6. Disengage the parking brake.
7. Fully depress and hold down the brake pedal.
8. Engage the parking brake, the disengage it (while holding down the brake pedal).
9. Engage the parking brake, the disengage it (while holding down the brake pedal).
10. Release the brake pedal.
11. Engage the parking brake.
12. Fully depress the brake pedal and then release.
13. Fully depress the brake pedal and then release.
1. Make sure the car is in Park and the parking brake is disengaged before you start the car.
2. Start the engine.
3. Engage the parking brake.
4. Fully depress the brake pedal and then release.
5. Fully depress the brake pedal and then release.
6. Disengage the parking brake.
7. Fully depress and hold down the brake pedal.
8. Engage the parking brake, the disengage it (while holding down the brake pedal).
9. Engage the parking brake, the disengage it (while holding down the brake pedal).
10. Release the brake pedal.
11. Engage the parking brake.
12. Fully depress the brake pedal and then release.
13. Fully depress the brake pedal and then release.
Thread
Thread Starter
Forum
Replies
Last Post
LexFather
GS - 3rd Gen (2006-2011)
2
12-04-05 12:33 PM