When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
If you jack up the car, there are flaps under that will un clip and give you full access to the foglight area. Or if you do a full lock, and pull back the feder liner you can access the foglights
Way easier than pulling off he bumper . its a PITA to align correctly.
If you jack up the car, there are flaps under that will un clip and give you full access to the foglight area. Or if you do a full lock, and pull back the feder liner you can access the foglights
Way easier than pulling off he bumper . its a PITA to align correctly.
We were installing my 3000k HID fogs - Had to remove the bumper to run the harness and mount the ballast. I wanted to mount the ballast behind the bumper beam so it's nice and secure.
02-17-12, 02:52 PM
. its a PITA to align correctly.
. At my favorite store Super Target!
