MashinA

iTrader: (20)

Nah pimp this is where its at

JMcDonald

iTrader: (2)

That first set is dope!

lexusis305

iTrader: (2)

Nice rims but I want a 9" lip to have the sick stance on IS . Lol

aCortIS101

iTrader: (8)

new wheels should be here soon and now searching for new tires. I want to achieve the stanced/flush look. My question is what tires (size/brand) would you recommend?
This is also my daily driver too.

Wheels are: Volk gtm F: 19” x 9.5” +21 / R: 19” 10.5” + 23

Currently on BC Coilovers and will get the rear fenders rolled. Also, would you recommend a rear camber kit too?

thanks

CarbonDtls

iTrader: (4)

Ok, tires I have are 225/40/18 and 255/40/18. Already have them so thats the size I need to keep.

Don't want to roll or pull fenders but would like to be kind of flush. Dropped on BC Coils close to tucking.

Have options for offsets for the front 18x8 in +48 or +35 offset?

Rear 18x9 in +28 or +38 offset?

JDKane527

iTrader: (10)

I'm looking at new tires for 18x10+35 rear and don't want the stretched look.
Would 275/35 fit or should I stay with 265/40 for the rear? Down to do fender mods as well.

Sffd103

iTrader: (16)

JDKane527...I'm rolling a 19x9.5 (+30) in the rear on a 275/30/19. You should be good. I've rolled the rears and rub a tiny bit, but I'm slammed on coils too.

XhyDra

iTrader: (8)

Anyone want to throw some input on this setup,

18x8.5 et35
18x9.5 et25

On F-Sport Spring Drop, with 235/40/18 front and 265/40/18 rear.

Rubbing, no rubbing, any good input is much appreciated!

JMcDonald

iTrader: (2)

You will rub up front with that offset, run a 225 up front

JMcDonald

iTrader: (2)

Kinda flush= going to rub if you want that, +35 F, and +28 rear will do you right

ahgil

Hi guys,

new on board, and I have a question regarding the wheel size

I am looking into Advan RG D wheels in this size
19x8.5 F +40
19x9.5 R +45

and these are the only option that they have for those size. I want to see if there is anyone with this setup and be able to post a pix of their car so I can see how deep the wheel sunk in.

Another question is, will the Brembo 6 pot brake be able to clear this wheel too.

any feedback would be appreciate it

Love this wheel

Thanks
Gilbert

JMcDonald

iTrader: (2)

How big are your rotors?

That size wheel will work on your car without any modification to your fenders.

ahgil

funny thing is, my car is not here until Jan... therefore I am just searching eveywhere for parts.

For the Rotor, It would be 355mm

anyone can share some pix of their ride with this similar size

Thanks

JMcDonald

iTrader: (2)

355mm will clear

MyIS350G

iTrader: (6)

will 19s with
19x8.5 F, 25 Offset 245/35/19
19x9.5 R, 25 Offset 275/35/19
fit on my IS350?
Lowered 1.5", rear fenders rolled and front still stock.