CalitriSC

iTrader: (13)

(continued from previous post)

Also all tire brands are not exactly the same size or height. Federals for example run at least one size big compared to other brands.

Husni08

Would I need to have any fender work done if I threw some 15mm spacers on my stock rear wheels wrapped in 275/40/18? Any rubbing issues? Thinking about it as a temporary set up

HAYSTACK

bumpskis for me

CalitriSC

iTrader: (13)

^^^ are you planning to roll your rear fenders? I'm running 20x11 rear with 295/25/20.

projectdna

iTrader: (56)

right...

yes, ride height and wheel gap are directly related, but that wasn't what I was getting at. but instead of feeding this discussion, I'm just going to pretend that you actually read and understood my earlier post... and move on.

btw, imitation is the sincerest form of flattery.

HAYSTACK

I wasnt planning on it. I just asked what tire size he suggest. I was thinking along the lines of 275/30 in the rear, and 225 or 235/30 in the front. I just didnt know with that particular offset would work at all and or with those tire sizes. Im not lowered on anything yet, just trying to get a few things at a time.

sfu250

hi everyone.
I want to get enkei pf01 18x9 +45 but sites ive been on say they dont fit.
I have an 08 is250awd. i dont want any rubbing, i dont plan on lowering and i have stock suspension. I test fitted the wheels on the front and it just clears the steering column. Im also wondering what tires are recommended for these wheels, i dont want any stretching. Minimal stretching is alright.
Thanks!!

JDMmanny

sup guys, posted this on another sections and got one response lol hoping for more...

car: is250
suspension: tein s-tech natural camber
wheels: Maya stm
front: 20x9 + approx 15-19
tires: 225/35/20 in the front (rub like crazy and cut the hell out of my liner and rolled fenders...)

rear:20x10.5 + approx 15-19
tires:245/35/20 (rub were the rear bumper and wheel-well meet. rolled and slight stretch)

wanted to know if going with a 30 series tire (225/30/20) will fix the rubbing or will they forever rub no matter what because it wasent ment to be??

check out the pics and see if they help. thanks

projectdna

iTrader: (56)

225/30-20 is around 3/4"-7/8" shorter than 225/35-20. 245/30/20 is nearly 1" shorter than its 35-series counterpart. the 30-series is highly recommended for 20" wheels.

given those widths, those offsets are aggressive enough to need fender work on all four corners: full-on roll + slight pull + shaved fender tabs.

you won't eliminate all of the rubbing, but at least the shorter tires + additional fender work should save your fenders and tires from each other.

Mv350

iTrader: (23)

your offsets are completely different than a standard isx50

projectdna

iTrader: (56)

do the wheels also clear the brake calipers?

235/40-18 should be fine.

Mv350

iTrader: (23)

225/40 oe 235/40 will work perfedct. you wont have any problems

sfu250

kk thanks. Yea the calipers clear. wonder why sites say they dont fit...
I guess ill test fit them again on the back as well but theres no tire on the wheel so i wont get to see it on the ground.

projectdna

iTrader: (56)

you don't need to have your 2is on the ground to see if the wheels clear the brake calipers. you can tell by mounting the wheels.

worst case scenario, run 5mm spacers. your proposed offsets are conservative enough that you can run spacers and still have lots (and i mean lots) of clearance.

HAYSTACK

20x9 F +36, and 20x10.5 R +45

Is this do-able?