Will those wheels fit? START HERE.
11-27-12 | 07:23 PM
Joined: Sep 2008
Posts: 908
Likes: 11
From: NSW
RPF1
Size, F:18X8 +35 with
R: 18X9 +35 with
will it fit on a 350 lowered on coilovers?
im not looking for agressive set up
i just want it to fit over the brakes
11-29-12 | 10:18 PM
Joined: Mar 2012
Posts: 312
Likes: 1
From: fl
hey guys I need help?
19x8.5 +20mm
19x9.5 +25mm
dropped on road magnets 2 inches , which tires will be best ?any fender mds required? thanks
11-30-12 | 07:46 AM
Joined: Feb 2012
Posts: 48
Likes: 0
From: AL
Does anyone know the largest width back tire you can put on an IS?
11-30-12 | 07:47 AM
Joined: Mar 2012
Posts: 312
Likes: 1
From: fl
Quote:
Originally Posted by
07awdis250
hey guys I need help?
19x8.5 +20mm
19x9.5 +25mm
dropped on road magnets 2 inches , which tires will be best ?any fender mds required? thanks
Can i use 225/35/19 & 265/30/19 with rolled fenders?
11-30-12 | 08:31 AM
Joined: Apr 2010
Posts: 710
Likes: 0
From: Ca
You shoul be fine with those specs. Will need a roll.
11-30-12 | 08:49 AM
Joined: Mar 2012
Posts: 312
Likes: 1
From: fl
Quote:
Originally Posted by
Quik208
You shoul be fine with those specs. Will need a roll.
Thanks, I want to stay away from pulling though.
11-30-12 | 09:38 AM
Joined: Apr 2010
Posts: 710
Likes: 0
From: Ca
Quote:
Originally Posted by
07awdis250
Thanks, I want to stay away from pulling though.
You shouldn't need a pull.
11-30-12 | 07:34 PM
Joined: Oct 2012
Posts: 147
Likes: 0
From: VA
Vossen CV1
20 X 9 +32
20 X 10.5 +42
any mods needed? recommended tire size? 07 IS350.
12-01-12 | 10:25 AM
Joined: May 2012
Posts: 121
Likes: 0
From: ATX,Texas
I have 19x9 19x10.5 +22 all around. My question is, what size tires i will need to pull them off on a IS250?
12-01-12 | 12:24 PM
Joined: Apr 2010
Posts: 710
Likes: 0
From: Ca
Quote:
Originally Posted by
mookie254
i have 19x9 19x10.5 +22 all around. My question is, what size tires i will need to pull them off on a is250?
225/35/19, 245/35/19
12-02-12 | 12:25 PM
Joined: Dec 2008
Posts: 941
Likes: 5
From: NY
19x8-1/2 +35 front
19x9-1/2 +42 rear
Will this fit? Concerned about the rear, maybe offsets are too high? I can throw a spacer on to clear spindle if needed
12-02-12 | 12:39 PM
Joined: Apr 2010
Posts: 710
Likes: 0
From: Ca
Quote:
Originally Posted by
pmanliu
19x8-1/2 +35 front
19x9-1/2 +42 rear
Will this fit? Concerned about the rear, maybe offsets are too high? I can throw a spacer on to clear spindle if needed
They will fit. No problem in the rear.
12-02-12 | 05:33 PM
Joined: Aug 2010
Posts: 810
Likes: 1
From: BKK
Quote:
Originally Posted by
pmanliu
19x8-1/2 +35 front
19x9-1/2 +42 rear
Will this fit? Concerned about the rear, maybe offsets are too high? I can throw a spacer on to clear spindle if needed
Rear is a little on conservative side. You can go as low as 19x9.5 +33 with non stretched 265-30-19 tire without needing any fender modification.
12-02-12 | 07:21 PM
Joined: Aug 2009
Posts: 5,639
Likes: 2
From: 949
Hey guys!... Sorry I went MIA for so long.
But I promise I'll stay awhile this time my signature is about to add another Lexus instead of my big red Chevy anymore.
Again any and all offset questions I have no problems answering. I'll be replying to unread ons tonight and tomorrow sorry about that guys!
It's gunna be good to have another Lexus again
12-02-12 | 07:28 PM
Joined: Aug 2009
Posts: 5,639
Likes: 2
From: 949
Quote:
Originally Posted by
Mookie254
I have 19x9 19x10.5 +22 all around. My question is, what size tires i will need to pull them off on a IS250?
No pull 215/35 235/35
Slight pull rear complete roll front 225/35 245/35
Actually here was my is350 with 19x10.5+22 245/35 with slight pull and no rear bumper tabs and gutted upper fender wells
Unsprung weight while I had the rear bumper off
And here is the result
Another angle
I personally like 19x10+20 better