RVCAis250

The specs are mildly aggresive. You'd be fine at that height if you don't go lower. If you do go lower you just need a roll.

hhss

iTrader: (1)

Thanks for the insight !

Silent53

20x8.5 +20(Front) 225/30/20
20x10 +25(Rear) 275/30/20

will it work?

i'd be dropped on Megan EZ. WOuld i have to do alot of camber adjustment in the rear?

Scless

iTrader: (2)

Will this work for my IS350 AWD? Not really trying to ruin any of my AWD functions. Don't want to do any fender modifications.
19x9.5 + 0 front and 19x10.5 +10 rear. Work VSXX rims.

RVCAis250

Would it work, yes. You just would need to do some fender work to make them work. And first off, I think those spec rims with those tires are too much. I think the tire is too beefy and it would work much easier with at least a mild stretch like 265/30 or 255/35. You'll need to roll and pull your rear fenders. Just roll on the fronts. After that, it depends how low you are and how wide of a tire size you go with

RVCAis250

You can't get by with those specs without any major fender work. Those are some really aggresive wheels to put on our 2IS.

Silent53

If I opt for 255/35 like you said with that mild stretch will i be flush after a fender roll in the rear?
and the 225/30 front is fine with just a fender roll?

RVCAis250

Yeah you'd be pretty flush. Just about as flush as you could get w/o major fender mods or camber kits.
And the front you'll be fine with a roll. It'll naturally give you a slight pull cause the fenders aren't as strong as the rears, so you will be fine unless you go really low then you may run into problems with the tabs but I think you should be fine.

soFreshIS

iTrader: (3)

Picked up set of 20inch Vip Modulars VR-08
Will be here next week

now i need tires!
whats size u guys think i would need?
they are 20x9 and 20x10.5
offset is in the 30's
Im Running Tein CS Coilovers

Would 225/35/20 and 255/35/20 be my best? or which u guys perfer for not much fender work?
Thanks

ethegent

I saw the AWD "will this fit" thread but it seems like the traffic flow there is dead.

If you can please tell me if this would fit my is250 AWD without fender work and ruining my AWD, I would greatly appreciate it.

20x9 +38 (235/30/20)
20x10.5 +42 (275/30/20)

Scless

iTrader: (2)

Thank you for the reply. I'll keep searching for some rims.

VIPISO460

iTrader: (4)

Will this work with rolled fenders, am concearned of the front..

19 x 9.5 +45 all around for IS250 AWD?

Dropped on BC Coils

mated to

225 / 35 / 19

Lemme know am shopping for tires thanks!

Scless

iTrader: (2)

Hi again, I'm looking at 20x9 + 13 all around. Will 20s rub on my stock suspension? Will they fit without fender modification? Thanks again

RVCAis250

Yes. It will rub and you'd need a fender roll if you stay at stock height.

tonnetje

my IS250 is lowered 1,3inch-30mm front/rear
i want those tiresizes on my rims
in front 235/35/19-8.5j -offset35
in rear 285/30/19-9.5j- offset 35 or 40
does it rub in the rear or sticking out with this offset ?
anybody have pictures with this offset in the rear?
in the front no problem i think but in the rear i dont know
anybody who know the answer please leave a comment
pictures are great to
greetz tonnetje