Sytfu_IS

iTrader: (4)

You don't need any fender mods, your front will need a 225/35 though.

iSuxeL

iTrader: (21)

That's what he said LOL

acefalcon2

iTrader: (20)

no probs... it is an A-Disk Gnosis sold on the classifieds... any possibility for it to clear Rotora/Stoptechs... with spacers... it needs 10mm spacers to clear 350 brakes... original offset +41 im spacing out to +31... for the fronts... thus the previous questions...

iSuxeL

iTrader: (21)

If you need a spacer just to clear 350 brakes then most likely you do for aftermarket BBK

acefalcon2

iTrader: (20)

do you think i'll need extra spacers? because the 350 calipers are fatter/wider than usual bbks...

Andre

dappy

iTrader: (13)

I have an interested buyer for my SSR Viennas with the following specs:

19x8.5 +43 with 235/35R19
19x9.5 +43 with 265/30R19

Will these wheels clear a stock IS300 and one lowered by 1.5"

Thanks.

HawkIS

Can I do a 19x9 +20 in the rear?

I have the F-sport springs and 225/35 tires.

Mv350

iTrader: (23)

yes you can, im runnin 9.5"+20

simple

iTrader: (2)

Is there anyway possible way to fit 19x10 +30 in the front of a is350? Will I rub with stretched tires (say 235)? Any help would be appreciated, TIA...

rule1223

iTrader: (15)

if no fender mods, the answer is no, even stock suspension, the answer is still no.

simple

iTrader: (2)

Thanks, just wanted to know. Would be sweet to run concaved F&R

rule1223

iTrader: (15)

you can roll your fender if you wanna run 19x10, but you will need higher offset, maybe +45.

mikez

Doesn't matter with offsets, the wheel is so wide you're going to rub while turning regardless lol

llamaboiz

you can always pull your fenders, not roll but pull

ANYTHING is possible if your willing to go the distance

simple

iTrader: (2)

I rather be safe, I don't wanna go too crazy with the fender mods.