Mv350

iTrader: (23)

damaster32 thatll fit sir

mercedessx

Thanks venzon

iSuxeL

iTrader: (21)

Those will fit without a hiccup.

acefalcon2

iTrader: (20)

these will fit with a 225/35 fronts and 265/30 rears?

soleeasii

iTrader: (10)

I currently run 19x8.5 +40 235-35-19
19x10 +48 265-30-19

Will these fit AWD ??

Volk Sf Challenge

19x8.5 +36 245-35-19
19x9.5 +34 275-30-19

How big would the lip be?

norapat01

Hey guys, I'm planning to buy a set of 18" CR Kai in Gunmetal in the following spec. So, I just want to know if it would fit the car and clear the IS350 big brake?

18x8.5 +37 Flat Face for fronts
18x9.5 +38 Deep Concave Face for rears

Thanks

acefalcon2

iTrader: (20)

yes it will fit the AWD... you need to run 235/35-19 fronts though.. it will provide you with a smaller difference in the running diameter in order not to screw with the AWD system the new Volks would be flushed... well maybe you need about 10mm spacer fronts and 5 rears to make them sit on the fender

clearing the IS350 brakes is about the disk too... i think work has a R-disk made for bbks... those offsets would definitely work and you can even put some spacers to make them flushed

403viet

HELP PLEASE

guys im running a 10.5" rim in the back

i need new tires , im currently pretty slammed on coils

i have an opportunity to get 265/30/19s falken's

is that too much of a stretch?? or should i jus keep looking for 255/35/19

integlspwr

iTrader: (2)

those will fit with no problem. i run a 18x9.5 +12 all around

SilvaIS350

iTrader: (3)

19x8 1/2 f 235/35/19
19x10 r 275/30/19
thinking about getting work sc1. i plan on keeping f sport suspension will that rub and i dont want to do any mods like heat the fender liners or roll my rear fenders? what offset should i go?

acefalcon2

iTrader: (20)

for without rolling fenders or any fender mods,

19x8.5+30 would be a good start...
19x10+43 would be a good start as well.... but go with some tires like Falken that have a round wall...

ISCjonny

iTrader: (7)

anyone know if these will work?

19x9.5 +22
19x11 +22

403viet

Help guys??

norapat01

Didn't see anything like that mention on the CR Kai's. They just have Flat face, Semi Concave face, and Deep Concave face.

My IS350 will be lower with Tein S-Tech and I don't want to deal with rubbing or fender rolling. Is that as aggressive as I can run without doing extra works?

Thanks

steezy

gotta roll the front and pull the back.