t0e

iTrader: (1)

Bavarian Auto -- brea

SeOuLiS250

iTrader: (5)

cut AND roll

VIS250P

iTrader: (1)

The front fender is soft metal and it could be easy to show wave look...

ek9vboi

iTrader: (3)

I saw the welds... kept on grinding. LOL No problems with anything coming apart here. I'm sure a few of them hellaflush ISx50 boys will pop in and say the same.

Forgot to mention, after reading this thread I went to the garage to work on it. 1 AM I finished and they are perfect! I did just the rears but its all good, the fronts will be done with the proper tool once I can locate one.

LiCelsior

iTrader: (32)

rolling has the chance of it catching the tire and mangling the fender though. im cut/partially rolled all around.

SoCal35

iTrader: (5)

Anyone know exactly where the weld spots are in the rears? I wanna avoid shaving too much before it's too late. If there are enough spots welded where I feel comfortable the metal sheets won't seperate, then I'll shave some more.

ek9vboi

iTrader: (3)

It won't. I'm pretty sure the GS and IS welds are not too different.

Just went downstairs and checked how much lip I have left. Its 1/4" when I measure right against the quarter panel prior to it making the bend inwards. Feels solid, I could shave more but it should be fine.

L-S-D

iTrader: (-1)

hey guys i havent done any fender mods before to my is350
and im rubbbin like a b.itch now so i need to either roll or shave it

whats the easiest way to do that? and what tools will i need ?
or if u guys have any other suggestions for a mild fender mod nothing to crazy... jus need to fix the rubbing

thanks allot

iSuxeL

iTrader: (21)

Not another roll or shave thread LOL

Shave/cut them, that's it.

Buy a hand dremel and use that cause it's much easier to control

datplayaz

iTrader: (9)

^^^ yup, that's what i used to cut mine.

L-S-D

iTrader: (-1)

ok got a hand dremel at the shop

but how do i do this? do i jus cut the fender liners above my wheels out??

lsD

Easiest would be to cut em, but a couple extra cutting disc too.

ek9vboi

iTrader: (3)

Cut/shave the rears. Roll the fronts.

ek9vboi

iTrader: (3)

BTW, I used a grinder to do my rears. The fronts I have a fender roller and will be doing it soon when I have the heat gun and time.

dangy

iTrader: (1)

I rolled everything.