yodeixmall

I recently bought this 4ft by 5ft black vinyl roof overlay for my is350. I was wondering if this is the proper manufacter(its made by oracal. model 751). its pretty thin so i was wondering if i bought the right one. If any of u have used this or other products please help me out with my decision.

heres the one i bought. Thanks



http://cgi.ebay.com/ebaymotors/ws/eB...ht_2433wt_1167

yodeixmall

oh how about a DIY on vinyl roofs. anyone have a good one?

josephdoc

- You can buy the material cheaper from any local tint/clearbra shop.
- It is almost not possible to get a clean installation on your first trial.
- Even a pro mess up sometimes, no kidding!
- Usually, the color start to fade on your first wash, and you can see it when you looking at your wax matt during your wash.
- It does not cost much for a proper paint job... unless you have a fin-atenna.

Just to share of what I have seen so far from feedbacks of my local car-freaks.

acefalcon2

iTrader: (20)

one of my neighbors have a Avery Vinyl... we've washed it 10 times at least... shows no fading... not much scratches... no peeling... we installed it on our own... just make sure you have good squeegee and a good heat gun... and PATIENCE..

you'll need a couple people to help you though..

Andre

brociouz

iTrader: (65)

Anyone know if there are any products to bring the shine back to a glossy black roof vinyl? Mine almost looks matte now. Then again, I paid like $80 for my roof to be done, so they probably used the cheapest material known to man.