panda327

iTrader: (3)

noo dun think so .. mines just the stock ones

shiny250

iTrader: (4)

i second that

EDIT: if you havent gotten in an accident and BOTH headlights have moisture just try to dry it out first. use a hair dryer and heat the surface of the lens from the outside and then open up the cover in the back and blow air into there with the hair dryer. use the silica packets to absorb small amounts of moisture. then put the covers back on properly. if the moisture comes back then definitely get them replaced by the dealer (which is what i did when i had it in mine).

671IS250

iTrader: (1)

Get it warrantied, thats what i did. and they replace my headlight right a right away no questions asked!

panda327

iTrader: (3)

argh i just took it in today ... they said the moisture isn't obvious enough ...

does anyone have the blueprint or pics of the headlight assembly?

i dropped a LED in there and i was wondering where it went .. i can't see it in the headlight anywhere ... is there a hole in the assembly that will let the LEd fall through ... becuz its pretty big ><

its one of these

i can't see it anywhere in the headlight .. but i did hear it drop down the bay somewhere... but i dunno if it was dropped inside the headlight or outside .. cuz it came off the harness as i was taking it out

i don't want dealer to take out the assembly and find an LED in there ... ><

shiny250

iTrader: (4)

im pretty sure its inside the headlight, just behind the chrome piece that people black out.

VIS250P

iTrader: (1)

IF u swap different HID bulbs in the headlight.. THat's ur fault

IF the HID didnt touch anything like swap, warranty will cover it

IT could be a ballast moisture can cuz headlight moisture

There are many way to figure out what cause the moisture

panda327

iTrader: (3)

i didn't touch the HID i only swapped the parking light to white light ..

should i take out the headlight assembly and take out the LED in there before i let dealer replace it ?

panda327

iTrader: (3)

do i need to remove the bumper to remove the headlight?

shiny250

iTrader: (4)

yea u need to remove the bumper to remove teh headlight