My new oem look
#113
Pole Position
iTrader: (26)
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
To clarify you mean that the genesis coupe bore centric diameter matches ours?
Cause if there's is bigger then that makes sense that they would "bolt" up to ours but I'd rather not have a wheel resting on just 5 lug nuts. I'd also like it to rest on my hub bore
#114
Lead Lap
iTrader: (12)
Join Date: Mar 2010
Location: DE
Posts: 593
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
My confusion has overtaken me.
To clarify you mean that the genesis coupe bore centric diameter matches ours?
Cause if there's is bigger then that makes sense that they would "bolt" up to ours but I'd rather not have a wheel resting on just 5 lug nuts. I'd also like it to rest on my hub bore
To clarify you mean that the genesis coupe bore centric diameter matches ours?
Cause if there's is bigger then that makes sense that they would "bolt" up to ours but I'd rather not have a wheel resting on just 5 lug nuts. I'd also like it to rest on my hub bore
I currently have the Genesis wheels on my car right now. When I got them installed, the mechanic asked if I had any hubcentric rings. I asked if I really needed them and he said no but, that they are recommended for any aftermarket wheels. I was still a little unsure so I bought a set of polycarbonate rings off eBay. I'm going to put them on whenever the weather clears up around here. I'll let you you know.
#116
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
sorry to say and i know this is all a matter of opinion and taste. But the Hyundai Genesis coupe has a better body then our cars. Only reason I didnt buy one is because I cant get over the fact its a Hyundai. If that car was a audi, infiniti, acura or even honda people would be buying them up like crazy.
I love the OEM look.....
![Big Grin](https://www.clublexus.com/forums/images/smilies/biggrin.gif)
#117
Pole Position
iTrader: (26)
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
So according to the genesis forum The genesis coupe hub bore is 67.1mm... And I think ours is 60.1mm. Not completely sure on either as I haven't measured either hub bore.
But if this IS true then I'm in wonder of how exactly the OP has no vibration? Anyone with these wheels should, imo, get hub rings for these genesis wheels.
But if this IS true then I'm in wonder of how exactly the OP has no vibration? Anyone with these wheels should, imo, get hub rings for these genesis wheels.
#118
Lead Lap
iTrader: (12)
Join Date: Mar 2010
Location: DE
Posts: 593
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
Alright, so I tried putting on the hubcentric rings yesterday. I had to shave off a little bit of the ring to get it to fit in the wheel. I then tried putting my wheel back on but had trouble getting them to fit on correctly so I just took the rings off. Haven't heard of anyone using hubcentric rings for these wheels and I honestly think the fitment is a close match without them. Also, I have not experienced any vibrations on these wheels.
#119
Pole Position
iTrader: (26)
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
Alright, so I tried putting on the hubcentric rings yesterday. I had to shave off a little bit of the ring to get it to fit in the wheel. I then tried putting my wheel back on but had trouble getting them to fit on correctly so I just took the rings off. Haven't heard of anyone using hubcentric rings for these wheels and I honestly think the fitment is a close match without them. Also, I have not experienced any vibrations on these wheels.
So to wrap my head around this you had 67.1 outter diameter hub ring w/ a 60.1 inner diameter and it wouldn't fit when you attempted to put that ring inside the genesis 19" wheel?
I'm wondering if in fact the ring should have been a 67.06 measurement???
Where did you get your hubcentric rings from?
Did you clean and brush the inner hub hole on the genesis wheel with a wire brush to clear out all debris prior to attempting to insert the hubcentric wheel?
Lastly, how much did you get the genesis wheels for?
TIA!
![Thumb Up](https://www.clublexus.com/forums/images/smilies/thumbsup.gif)
#120
Lead Lap
iTrader: (12)
Join Date: Mar 2010
Location: DE
Posts: 593
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
Thanks for chiming back in.
So to wrap my head around this you had 67.1 outter diameter hub ring w/ a 60.1 inner diameter and it wouldn't fit when you attempted to put that ring inside the genesis 19" wheel?
I'm wondering if in fact the ring should have been a 67.06 measurement???
Where did you get your hubcentric rings from?
Did you clean and brush the inner hub hole on the genesis wheel with a wire brush to clear out all debris prior to attempting to insert the hubcentric wheel?
Lastly, how much did you get the genesis wheels for?
TIA!![Thumb Up](https://www.clublexus.com/forums/images/smilies/thumbsup.gif)
So to wrap my head around this you had 67.1 outter diameter hub ring w/ a 60.1 inner diameter and it wouldn't fit when you attempted to put that ring inside the genesis 19" wheel?
I'm wondering if in fact the ring should have been a 67.06 measurement???
Where did you get your hubcentric rings from?
Did you clean and brush the inner hub hole on the genesis wheel with a wire brush to clear out all debris prior to attempting to insert the hubcentric wheel?
Lastly, how much did you get the genesis wheels for?
TIA!
![Thumb Up](https://www.clublexus.com/forums/images/smilies/thumbsup.gif)
![Thumb Up](https://www.clublexus.com/forums/images/smilies/thumbsup.gif)