Will those Wheels Fit an IS250 AWD - Part Uno
#61
Quick question. I plan on getting BC coils and dropping about 1.5". I don't want to run staggered but was thinking of running
F - 19x9__40mm offset__tire 235/35/19
R - 19x9__34mm offset__tire 235/35/19
I wouldn't need to adjust my fenders with this would I? Would this be the most aggressive non staggered setup without altering fenders? Any help would be appreciated.
F - 19x9__40mm offset__tire 235/35/19
R - 19x9__34mm offset__tire 235/35/19
I wouldn't need to adjust my fenders with this would I? Would this be the most aggressive non staggered setup without altering fenders? Any help would be appreciated.
#64
Racer
iTrader: (5)
Vertini 20s
ok so im going to go with 20s on the Lex and wanted to know if these will fit and which will be the best setup
2007 is250
Vertini Wheels: Fairlady (Black W/Machine Face) - 20x9.5 inch wheel
Vertini Wheels: Fairlady (Black W/Machine Face) - 20x10.5 inch wheel
Vertini Wheels: Fairlady (Black W/Machine Face) - 20x10 inch wheel
the pics attached are of the wheels and one on someones IS but I have no clue what setup they ran... can someone assist me with this
2007 is250
Vertini Wheels: Fairlady (Black W/Machine Face) - 20x9.5 inch wheel
Vertini Wheels: Fairlady (Black W/Machine Face) - 20x10.5 inch wheel
Vertini Wheels: Fairlady (Black W/Machine Face) - 20x10 inch wheel
the pics attached are of the wheels and one on someones IS but I have no clue what setup they ran... can someone assist me with this
#65
Driver School Candidate
Join Date: Jul 2011
Location: NY
Posts: 20
Likes: 0
Received 0 Likes
on
0 Posts
Hi everyone, I'm new to this forum and a new IS250 awd owner so please take it easy on me. Currently running 17" stock wheels and tires. Would like to know if 2011 IS350 stock wheels and tires will fit my car. Wheels on the IS350 is 18x8 and 18x8.5. The tires are 225/40 and 255/40.
Wondering if running these would mess up the AWD system. Any help would be much appreciated. Thanks!
Wondering if running these would mess up the AWD system. Any help would be much appreciated. Thanks!
#71