Last edit by: IB Advertising
See related guides and technical advice from our community experts:
Browse all: Exterior Guides
- How to Paint Rims Using Plasti-Dip
Step by step instructions for do-it-yourself repairs
Browse all: Exterior Guides
DIY - Matte Black Emblems - Plastidip, no emblem removal required!
#496
I pretty much unloaded a can per wheel. So they aren't thin coats to say the least. I might do a couple more. I was also limited by how much plastidip the shop had. Good call on the cleaning. I also lightly sanded down all the rash on the wheels before cleaning.
Make sure your tires are mounted before you apply dip. The tire machine will make mincemeat out of the coating, resulting in you trying to peel that whole thing off and redoing it.
As an FYI for the Canadians out there, Home Depot in Canada doesn't carry dip. Home Hardware does.
Make sure your tires are mounted before you apply dip. The tire machine will make mincemeat out of the coating, resulting in you trying to peel that whole thing off and redoing it.
As an FYI for the Canadians out there, Home Depot in Canada doesn't carry dip. Home Hardware does.
#497
Just did my homies BMW 335i (emblems and front grill) and it's dope!
Also, just washed my car for the first time after "dipping" my rims, holds up perfect!
so much easier to clean, you can't see brake dust, it just wipes off
Also, just washed my car for the first time after "dipping" my rims, holds up perfect!
so much easier to clean, you can't see brake dust, it just wipes off
#500
Dipped my winter wheels! You only see three because my 4th is used as my spare and I was too lazy to get it out. lol I will get that done soon. There are a few flaws but I don't care....just my winter wheels. I am very happy though with the results.
OEM RX300 16" winter wheels
Before:
Washed and cleaned:
1st coat:
2nd coat:
3rd coat:
Finished:
OEM RX300 16" winter wheels
Before:
Washed and cleaned:
1st coat:
2nd coat:
3rd coat:
Finished:
#501
Dipped my winter wheels! You only see three because my 4th is used as my spare and I was too lazy to get it out. lol I will get that done soon. There are a few flaws but I don't care....just my winter wheels. I am very happy though with the results.
OEM RX300 16" winter wheels
Finished:
OEM RX300 16" winter wheels
Finished:
Last edited by LexasRN; 10-15-10 at 05:04 PM.