EyeKutr

iTrader: (5)

I have a 3rd gen GS but I know many of you use similar bulbs. I've been running the hyper yellow Nokya 2500 bulbs for a while. They dont seem to last long and I've needed to replace each bulb once due to premature burnout....I was not surprised to see a bulb out this week so I went to swap my OEM bulbs back since this ***** is getting old....Look what I found....needless to say I am back to OEM now....luckly, the connection is still good and the OEM bulb works without me having to swap the wire harness (yet)

quang

iTrader: (8)

wow... cross it out from my mod list, but isn't 70W too high?

GiantsFan

iTrader: (9)

Luminics ftw ...

If you look at the power rating, the nokya is way too high compared to stock/recommended levels... If i remembr correctly, Luminics is only like 5w higher.

nmpeter

iTrader: (15)

I've had those for almost a year now and they're still fine...... Knock on wood.

Lexitegra

iTrader: (2)

WOW. Thanks for the warning, I was just about to buy a set....guess I'll have to do a bit more research first!

soulsoarer

iTrader: (2)

They also have the 55w version, the package looks different too. I have them on my car and the 06 Tundra. 70w seems too high so I got the 55w ones which is what the output its rated for I think?

suicidesam

op what lights did these nokya replace?

dappy

iTrader: (13)

The "new" packaging Nokya yellows says 70W outside, but he engraving on the bulbs itself are rated at only 55W. This should be safe since it's OEM rated.

relaxfoo

iTrader: (1)

What does the engraving on your bulb say 55w or 70w because my bulb has 55w engraved, thanks for the warning.

516IS

iTrader: (12)

so 55W is fine? If so, mine should be OK... I will double check anyway.

dappy

iTrader: (13)

Yes, if the bulb is engraved with 55W rating you'll be fine since that's OEM wattage.

Synetix250

yeah, 70 w is definitely too high-burns way too hot. i have luminics jdm yellows and haven't had any problems, maybe try them. i'd recommend them.

Bigrahizzl

iTrader: (8)

just ordered the Luminincs just cuz of this issue.

mikez

I use these for over a year and they are okay, but I use them for my high beams though, so most of the time they are just on half power as DRL.

CLIS250

iTrader: (4)

yea, thats what i was reading around on the forums and i also went with luminics for my drls.