2009 IS250/350 Grille Disassembly
#1
Pole Position
Thread Starter
2009 IS250/350 Grille Disassembly
13. REMOVE RADIATOR GRILLE ASSEMBLY
(a) Using a clip remover, remove the 2 clips.
(b) Remove the 4 nuts.
(c) Disengage the 6 claws.
(d) Disengage the 8 claws and remove the radiator grille moulding.
14. REMOVE RADIATOR GRILLE
(a) Using a clip remover, remove the 2 clips.
(b) Disengage the 6 claws and remove the radiator grille.
(a) Using a clip remover, remove the 2 clips.
(b) Remove the 4 nuts.
(c) Disengage the 6 claws.
(d) Disengage the 8 claws and remove the radiator grille moulding.
14. REMOVE RADIATOR GRILLE
(a) Using a clip remover, remove the 2 clips.
(b) Disengage the 6 claws and remove the radiator grille.
Last edited by nonopr01; 03-15-11 at 07:30 AM.
The following users liked this post:
skur (03-09-24)
#6
Sorry for bringing this thread back from the dead. I'm having some problems removing the grille. I've removed all the bolts and now I need to disengage the claws. How do I do that? The ones from the bottom are not visible so how do I disengage those ones? The grille won't budge.
#7
Driver School Candidate
Join Date: Jan 2012
Location: UT
Posts: 46
Likes: 0
Received 0 Likes
on
0 Posts
Sorry for bringing this thread back from the dead. I'm having some problems removing the grille. I've removed all the bolts and now I need to disengage the claws. How do I do that? The ones from the bottom are not visible so how do I disengage those ones? The grille won't budge.
Last edited by xredgiex; 04-18-12 at 03:29 PM.
Trending Topics
#10
#13
Driver School Candidate
Join Date: Jan 2012
Location: UT
Posts: 46
Likes: 0
Received 0 Likes
on
0 Posts
The easiest way I found was just taking off the bumper. Next time I do it I'll make a DIY.
If you have a 10mm wrench or socket and a phillips screwdriver you can take off the bumper. I'm sure there is a DIY for that somewhere. After that, taking the grille and grille surround apart is pretty simple.
If you have a 10mm wrench or socket and a phillips screwdriver you can take off the bumper. I'm sure there is a DIY for that somewhere. After that, taking the grille and grille surround apart is pretty simple.
#14
Lexus Champion
iTrader: (17)
#15
Lexus Champion
iTrader: (2)
The easiest way I found was just taking off the bumper. Next time I do it I'll make a DIY.
If you have a 10mm wrench or socket and a phillips screwdriver you can take off the bumper. I'm sure there is a DIY for that somewhere. After that, taking the grille and grille surround apart is pretty simple.
If you have a 10mm wrench or socket and a phillips screwdriver you can take off the bumper. I'm sure there is a DIY for that somewhere. After that, taking the grille and grille surround apart is pretty simple.
I have all the tools but really don't want to attempt to take the bumper off...I think it will be putting it back on that troubles me, I always get stuck on those steps