Pics of my '06 IS250 with 2011MY headlights w/ LED Strip
#560
Lexus Champion
iTrader: (20)
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
i looked on the back of the fuse box in the engine indeed it says IGN2 and it had a 20a fuse in there.
i wired it the way joez did as well just a minute ago and still it doesn't work. every other light works including DRL, the orange sidemarker corner light just not the LED portion. i feel like it's a ground issue. im running out of ideas though. anyone know how to troubleshoot this issue?
i wired it the way joez did as well just a minute ago and still it doesn't work. every other light works including DRL, the orange sidemarker corner light just not the LED portion. i feel like it's a ground issue. im running out of ideas though. anyone know how to troubleshoot this issue?
#561
Lexus Champion
iTrader: (20)
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
Thanks for those who have helped me with this process with PMs, etc inluding Ohiois350z, JoeZ, etc. i finally got it to work. working outside at 3:21 Am with about 39 degrees outside
#562
Lexus Champion
iTrader: (20)
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
ok, last night they were working, this morning, they aren't working. my battery has been weak , it was dead yesterday but it still made the hids and the led strip come on. this morning, the hids come on but not the led strips. ive checked all wiring again and even redid it but nothing.
does anyone know a certain fuse i should look at? all the ones i looked at seems fine but when i looked at the headlamp fuse, it's more of a big relay.
any ideas?
does anyone know a certain fuse i should look at? all the ones i looked at seems fine but when i looked at the headlamp fuse, it's more of a big relay.
any ideas?
#563
Lead Lap
iTrader: (11)
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
I didn't want to read through all the pages..
did you buy those lights from Sewell? (since they prewire it)
Figure out how to get those wires out of the harness? (just need a small toothpick to release it)
I bought my headlights and had to repin to get the LED strips to work since they were not bought from Sewell
did you buy those lights from Sewell? (since they prewire it)
Figure out how to get those wires out of the harness? (just need a small toothpick to release it)
I bought my headlights and had to repin to get the LED strips to work since they were not bought from Sewell
#565
Lexus Champion
iTrader: (20)
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
I didn't want to read through all the pages..
did you buy those lights from Sewell? (since they prewire it)
Figure out how to get those wires out of the harness? (just need a small toothpick to release it)
I bought my headlights and had to repin to get the LED strips to work since they were not bought from Sewell
did you buy those lights from Sewell? (since they prewire it)
Figure out how to get those wires out of the harness? (just need a small toothpick to release it)
I bought my headlights and had to repin to get the LED strips to work since they were not bought from Sewell
my parking side lights arne't working so im trying to find that fuse now.
#569
Lead Lap
iTrader: (19)
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
Finally, adding some much needed "Light" to this thread....... !!!
Some things to know... If you buy a pre-made kit, you don't have to deal with any of this stuff...
The only thing you have to do is swap the Flasher Relay cube, which sits in the space above the Brake & Gas pedal under the dash.
If you have an IS with AFS, you will indeed get a flashing AFS indicator light.. If you have an IS with just the Halogen headlights, you will not have a flashing AFS indicator.
So far the only known way to stop the blinking AFS light, is to crack open the cluster and block the light that passes through that area with something Black.
Also, the bumper brackets that screw into the bottom of the headlights, will need slight modifications to be attached to the new MY2011 lights.. Basically dremeling some of it off that sits over the LED wire dome cap on the underside of the housings.
But still, only 2 screws will line up after that.
I tried the new step mentioned, of only swapping the GREEN wire location, that DID NOT work on my 2008 IS-F.
So I went with what "thinktwice" originally did..
I snipped the thinner solid red wire, then tapped it into the Black & White wire underneath it..
Then I changed the pin location of the Green Wire to the empty spot... Done.!!
I also tested the Solid Black wire and Solid Green wire to confirm the differences between the 50% & 100% brightness of the LED strip.
I went with 100% power.
Also, the new Flasher relay needed is indeed Lexus / Toyota Part # 81980-06020
That takes all of about 5 minutes to find unplug & replug the new unit.
I only got pics of the Flasher swap so far.. (I was in a rush)
I will try to update this post in the near future with how the wiring looks before and after the slight modification done to the primary male plug connector on the new headlight.
Thanks for all input in this thread..!!
Regards,
~ Joe Z![Smilie](https://www.clublexus.com/forums/images/smilies/smile.gif)
Some things to know... If you buy a pre-made kit, you don't have to deal with any of this stuff...
The only thing you have to do is swap the Flasher Relay cube, which sits in the space above the Brake & Gas pedal under the dash.
If you have an IS with AFS, you will indeed get a flashing AFS indicator light.. If you have an IS with just the Halogen headlights, you will not have a flashing AFS indicator.
So far the only known way to stop the blinking AFS light, is to crack open the cluster and block the light that passes through that area with something Black.
Also, the bumper brackets that screw into the bottom of the headlights, will need slight modifications to be attached to the new MY2011 lights.. Basically dremeling some of it off that sits over the LED wire dome cap on the underside of the housings.
But still, only 2 screws will line up after that.
I tried the new step mentioned, of only swapping the GREEN wire location, that DID NOT work on my 2008 IS-F.
So I went with what "thinktwice" originally did..
I snipped the thinner solid red wire, then tapped it into the Black & White wire underneath it..
Then I changed the pin location of the Green Wire to the empty spot... Done.!!
I also tested the Solid Black wire and Solid Green wire to confirm the differences between the 50% & 100% brightness of the LED strip.
I went with 100% power.
Also, the new Flasher relay needed is indeed Lexus / Toyota Part # 81980-06020
That takes all of about 5 minutes to find unplug & replug the new unit.
I only got pics of the Flasher swap so far.. (I was in a rush)
I will try to update this post in the near future with how the wiring looks before and after the slight modification done to the primary male plug connector on the new headlight.
Thanks for all input in this thread..!!
Regards,
~ Joe Z
![Smilie](https://www.clublexus.com/forums/images/smilies/smile.gif)
You my friend are a GOD, easy as pie!!! =)
Last edited by scorpionge; 12-01-12 at 06:11 PM.
#570
Driver School Candidate
Join Date: Aug 2012
Location: Singapore
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
http://minkara.carview.co.jp/en/imag...3d10644229ac1a
Read this on a japanese website. This guy posted a wiring diagram that he did when he install the 2012 LED headlights to his 2006 ride.
Any comments?
Read this on a japanese website. This guy posted a wiring diagram that he did when he install the 2012 LED headlights to his 2006 ride.
Any comments?