Any DIY on replacing the water pump?
#16
Pole Position
Join Date: Nov 2010
Location: Austin,Texas.
Posts: 257
Likes: 0
Received 0 Likes
on
0 Posts
Just wanted to give a huge thanks to Iceman5210 and lancematic for tips on replacing the water pump on my car. I finished it this weekend and so far its looking good. Took a bit of work, but I saved about $550 and I became a little more familiar with my car! I wanted to do a DIY, but my camera charger is missing so I couldn't do it.
In case anyone is curious, its relatively simple to do the install. You don't need to remove the AC compressor at all. There are only two tricky parts to it. The first is removing the water pump pulley. You don't need a special tool for this. You can use a screwdriver or something similar to counteract the spin of the pulley to allow you to remove the 4 bolts on it. The second is removing one bolt from the water pump that's partially blocked by the tensioner pulley. The repair procedure actually says to remove the AC compressor to allow you to remove the whole tensioner pulley assembly and gain access to the bolt, but this is not necessary. As lancematic pointed out to me, all you have to do is remove the tensioner pulley. It will be a left hand threaded bolt.
Other than that, it should be relatively easy to do. If anyone needs help, I'll be more than happy to help. Just send me a message!
In case anyone is curious, its relatively simple to do the install. You don't need to remove the AC compressor at all. There are only two tricky parts to it. The first is removing the water pump pulley. You don't need a special tool for this. You can use a screwdriver or something similar to counteract the spin of the pulley to allow you to remove the 4 bolts on it. The second is removing one bolt from the water pump that's partially blocked by the tensioner pulley. The repair procedure actually says to remove the AC compressor to allow you to remove the whole tensioner pulley assembly and gain access to the bolt, but this is not necessary. As lancematic pointed out to me, all you have to do is remove the tensioner pulley. It will be a left hand threaded bolt.
Other than that, it should be relatively easy to do. If anyone needs help, I'll be more than happy to help. Just send me a message!
#17
Driver
Join Date: Mar 2002
Location: Ontario, Canada
Posts: 183
Likes: 0
Received 0 Likes
on
0 Posts
I just had mine in to the dealer for the fuel leak recall, oil chg and diff fluid change (75w90 synthetic) .
The header of this thread caught my eye though .... because when i picked it up they said they also replaced the water pump under warranty. I guess it must have been under the longer engine warranty because the basic 4 yr warranty ended last April (2010).
Anyway, are water pumps an known issue ?
KC
The header of this thread caught my eye though .... because when i picked it up they said they also replaced the water pump under warranty. I guess it must have been under the longer engine warranty because the basic 4 yr warranty ended last April (2010).
Anyway, are water pumps an known issue ?
KC
#19
So I've been hearing a low grinding sound coming from my car's engine and I also noticed some coolant leaking. I figured it might be the water pump, but I still had Lexus take a look to make sure. The dealer confirmed that the water pump needs to be replaced and I'm out of warranty so they're charging me $720!
I want to try and replace it myself. Do you guys know of any DIY out there for this or any sources that I can use to help me out?
Thanks in advance!
I want to try and replace it myself. Do you guys know of any DIY out there for this or any sources that I can use to help me out?
Thanks in advance!
I think I am having the same problem on my 06 IS350
#20
Lead Lap
iTrader: (1)
Join Date: Jan 2009
Location: TX
Posts: 598
Likes: 0
Received 0 Likes
on
0 Posts
My indicator was the sound of a bearing going out. No need to fear it. Get down then and check how solid the water pump pulley/bearing is. When it's time to replace it, as long as you know what to do and have the right tools (not too many crazy ones) it's pretty easy and you'll feel good for having done it (if you're like me and this would be your first engine part repair/replacement) It's surprising that I heard it because of how loud my music is but I'm usually overly aware of sounds/feels. after about a week of a 'new noise;' I got down there and could see some places where coolant had leaked from the bearing going out so....there it was.
#21
Pole Position
Thread Starter
iTrader: (1)
Join Date: Oct 2006
Location: CA
Posts: 286
Likes: 0
Received 0 Likes
on
0 Posts
No, they did charge me around $60 for inspection. Should have trusted my instincts though and passed on the inspection. It's pretty obvious when it's the water pump. Like everyone else has also mentioned, it's usually a grinding sound. Just open the hood and put your ear next to the water pump.
#22
I should make reading the Lexus Forums a habit. My 06' IS 350 with 53k miles stranded me the other day. It was a radiator leak and maybe a water pump and maybe more. The dealership has had the car for 3 days and I still have not received a call. Second time in my life I have bought Xtended warranty on a car. My first one was on My Tauros SHO.
I am glad I did.
I am glad I did.
#23
Driver School Candidate
Join Date: Jan 2012
Location: texas
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
2006 lexus IS 250 water pump
I replaced my water pump myself last fall. Cheapest place to get a rebuilt pump is rockauto.com (A-1 Cardone for $73.79). If you search you will find that I did a review on the pump. Install took about 2 hours and a few beers. If you want I can write up a basic DIY and send it to you.
Thank you
#24
Lexus Fanatic
iTrader: (1)
Here you go:
https://www.clublexus.com/forums/att...-pump-svce.pdf))
#25
Driver School Candidate
Join Date: Aug 2012
Location: CA
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Tis
[QUOTE=Kurtz;6339001]TIS is what dealerships use. It's the most current and complete information available. It's $15 for 2-days access.
Hi, I planning to replace my water pump as well, I just had a service in Toyota and I was told my water pump has leak and my front timing cover has leak as well; i`m just wondering where i can get original parts and how can i get access toTIS...thanks...
Hi, I planning to replace my water pump as well, I just had a service in Toyota and I was told my water pump has leak and my front timing cover has leak as well; i`m just wondering where i can get original parts and how can i get access toTIS...thanks...
#26
Driver School Candidate
Join Date: Aug 2012
Location: CA
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Thermostat
Just wanted to give a huge thanks to Iceman5210 and lancematic for tips on replacing the water pump on my car. I finished it this weekend and so far its looking good. Took a bit of work, but I saved about $550 and I became a little more familiar with my car! I wanted to do a DIY, but my camera charger is missing so I couldn't do it.
In case anyone is curious, its relatively simple to do the install. You don't need to remove the AC compressor at all. There are only two tricky parts to it. The first is removing the water pump pulley. You don't need a special tool for this. You can use a screwdriver or something similar to counteract the spin of the pulley to allow you to remove the 4 bolts on it. The second is removing one bolt from the water pump that's partially blocked by the tensioner pulley. The repair procedure actually says to remove the AC compressor to allow you to remove the whole tensioner pulley assembly and gain access to the bolt, but this is not necessary. As lancematic pointed out to me, all you have to do is remove the tensioner pulley. It will be a left hand threaded bolt.
Other than that, it should be relatively easy to do. If anyone needs help, I'll be more than happy to help. Just send me a message!
In case anyone is curious, its relatively simple to do the install. You don't need to remove the AC compressor at all. There are only two tricky parts to it. The first is removing the water pump pulley. You don't need a special tool for this. You can use a screwdriver or something similar to counteract the spin of the pulley to allow you to remove the 4 bolts on it. The second is removing one bolt from the water pump that's partially blocked by the tensioner pulley. The repair procedure actually says to remove the AC compressor to allow you to remove the whole tensioner pulley assembly and gain access to the bolt, but this is not necessary. As lancematic pointed out to me, all you have to do is remove the tensioner pulley. It will be a left hand threaded bolt.
Other than that, it should be relatively easy to do. If anyone needs help, I'll be more than happy to help. Just send me a message!