B16da9

iTrader: (7)

Stock fogs with 6K HID's, with both my fogs and headlights running with a relay harness.

CCJ22

iTrader: (26)

nice ..

Jzsicklexi

iTrader: (3)

I just bought all my stuff to do this... Thanks for the boost of confidence. Any more recent pics with the lights aligned?

B16da9

iTrader: (7)

Sorry don't have recent picture.


This past weekend I did a retofit on 2000 Integra headlights using TSX projectors and I can tell you that the IS lights were a lot easier to work with.

Jzsicklexi

iTrader: (3)

Thanks for the tips... Just got mine mounted. Waiting for my 55w ballast to arrive then I will fire them up and align them on the car. Then mount the shrouds, put them back together, and install and run the relay harness

CCJ22

iTrader: (26)

Did you get the morimoto 55w ballast JZ?

Jzsicklexi

iTrader: (3)

I actually got some from a company called MDE. My buddy is a wholesaler for them. Japanese parts and inspected by Philips in Germany is what they say in the description. $60 so I figured it was worth a shot. My 35w kit I use now is awesome. No flickering and the bulbs look as good an hid plug and play could get. If they suck I'll probably get the morimoto ballast and while I'm in there swap to the 85122+ Philips bulbs.

Passat774

iTrader: (1)

Thanks, for all the pictures!

I just performed mine this weekend and used RX330 AFS projectors with clear TSX lenses. Then used a D1S Xenarc 6k kit that I had.

It wasn't for this thread I would have never been inspired to perform the retro fit. Thanks again!

B16da9

iTrader: (7)

you're welcome.

whitebeast

iTrader: (5)

Do you need to take out headlight to do aligment or just use factory alig nut?

B16da9

iTrader: (7)

The way I do my retrofit you can use the factory aligment nut.

Poenado

Do you have any pictures or info on the wiring? Like how to wire up the new ballast?