When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
It may not clear the calipers on the 350. I had to run 3mm spacer to get it to just clear in the front. Also, on Megan EZ coils, I am rubbing on every dip on the fender liner up front.
will it fit without spacer? and if im riding on stock height or lower?
i will lower the car later. will these still fit?
anyone can answer this question will be great thank you!!
like a few others have already mentioned, there is a there is a will those wheels fit? thread where you could have posted this question. but since your post is after the fact...
those offsets are conservative enough where you won't need fender modifications to make them fit. but... (see below)
Originally Posted by inno
It may not clear the calipers on the 350. I had to run 3mm spacer to get it to just clear in the front. Also, on Megan EZ coils, I am rubbing on every dip on the fender liner up front.
i would contact the manufacturer to find out if you need to run spacers or not, though i am pretty much sure that with your offset you will have to run spacers.
inno> heat your fender lining and "push" the lining out of the way. that, or you can just let the tire rub a hole in your fender lining.