Success: Installed an IS300 Torsen LSD in my IS250
#136
Driver School Candidate
Join Date: May 2021
Location: Sabah
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
#138
Sorry to dig up such an old post.
I currently have an IS200 rear diff and i've bolted it to my IS250 but i've found the inside splines are way to big on my IS250 to fit in the IS200 diff. Does anyone know if the outer splines from the IS200 are the same size as the IS250? Can i just buy IS200 shafts and fit them in to my IS250 hubs or do i need the IS200 hubs also?
Unsure but i have found IS200 inner CV joint which will mount to the diff but unsure if the CV joint can be joined to my IS250 shaft as the CV joint looks very different. Any clarification would be great.
I currently have an IS200 rear diff and i've bolted it to my IS250 but i've found the inside splines are way to big on my IS250 to fit in the IS200 diff. Does anyone know if the outer splines from the IS200 are the same size as the IS250? Can i just buy IS200 shafts and fit them in to my IS250 hubs or do i need the IS200 hubs also?
Unsure but i have found IS200 inner CV joint which will mount to the diff but unsure if the CV joint can be joined to my IS250 shaft as the CV joint looks very different. Any clarification would be great.
#139
Lexus Test Driver
iTrader: (2)
Sorry to dig up such an old post.
I currently have an IS200 rear diff and i've bolted it to my IS250 but i've found the inside splines are way to big on my IS250 to fit in the IS200 diff. Does anyone know if the outer splines from the IS200 are the same size as the IS250? Can i just buy IS200 shafts and fit them in to my IS250 hubs or do i need the IS200 hubs also?
Unsure but i have found IS200 inner CV joint which will mount to the diff but unsure if the CV joint can be joined to my IS250 shaft as the CV joint looks very different. Any clarification would be great.
I currently have an IS200 rear diff and i've bolted it to my IS250 but i've found the inside splines are way to big on my IS250 to fit in the IS200 diff. Does anyone know if the outer splines from the IS200 are the same size as the IS250? Can i just buy IS200 shafts and fit them in to my IS250 hubs or do i need the IS200 hubs also?
Unsure but i have found IS200 inner CV joint which will mount to the diff but unsure if the CV joint can be joined to my IS250 shaft as the CV joint looks very different. Any clarification would be great.
The other option is buying used axles and open them up, swap ends. You'll need new grease and clamps. New boots would be good too.
GL
The following users liked this post:
MrTrendizzle (08-03-23)
#140
Pit Crew
How much did this cost you?
Thread
Thread Starter
Forum
Replies
Last Post
es808
IS - 2nd Gen (2006-2013)
15
11-30-13 07:07 PM
An2ny
2Gen IS250 / IS350 / IS-F Classifieds (06-13)
1
10-28-13 11:44 AM