ISF wheels on IS250
02-25-12, 10:10 PM
#20
Looks very good Alantjai.I like the first picture more that is more lowered.I m also on Tein comfort sport and the dealer set the suspention as yours in the second picture.What will happen if i lower it as yours in the first picture?How was the ride?Will have a promblem.I like the no finger gup look
02-25-12, 10:33 PM
#22
Lexus Test Driver
Awesome apearance. Stock Lexus parts IMO look the most expensive. Very classy! 
02-25-12, 11:53 PM
#23
Pole Position
Thread Starter
Looks very good Alantjai.I like the first picture more that is more lowered.I m also on Tein comfort sport and the dealer set the suspention as yours in the second picture.What will happen if i lower it as yours in the first picture?How was the ride?Will have a promblem.I like the no finger gup look
But with 235/35/19 tires and the spacers and lowering, it will hit the bumper tab a little bit when driving some harder on bumps. Without spacers would not hit the tab and with 225 tires it should be safe
OR just increase the height a little bit
(or modify the bumper tab :P )I am planning to lower the rear like the first pic
lol, because the stance on the first pic is really nice!! First picture is 1 finger gap
second picture is 1.5 fingergap
02-25-12, 11:55 PM
#24
Pole Position
Thread Starter
02-26-12, 12:03 AM
#25
I had my winter tires on 225/40/18 and 245/40/18 with the same height as in the first picture, I didn't had any problems accept when fully loaded and going over high traffic bumps.
But with 235/35/19 tires and the spacers and lowering, it will hit the bumper tab a little bit when driving some harder on bumps. Without spacers would not hit the tab and with 225 tires it should be safe
OR just increase the height a little bit (or modify the bumper tab :P )
I am planning to lower the rear like the first pic lol, because the stance on the first pic is really nice!!
First picture is 1 finger gap
second picture is 1.5 fingergap
But with 235/35/19 tires and the spacers and lowering, it will hit the bumper tab a little bit when driving some harder on bumps. Without spacers would not hit the tab and with 225 tires it should be safe
OR just increase the height a little bit
(or modify the bumper tab :P )I am planning to lower the rear like the first pic
lol, because the stance on the first pic is really nice!! First picture is 1 finger gap
second picture is 1.5 fingergap
as you can see the front is more than 1 finger gup but the coilovers can go lower.That is why i m asking you if i lower it as you did in the first picture and stiff the coils a bit will i have any promblems
02-26-12, 12:06 PM
#29
Pole Position
Thread Starter
The following users liked this post:
ryanSC300lover (12-24-17)