sewell offering 2011+ LED headlights for $1200
03-28-12 | 10:12 AM
#451
Driver School Candidate
Joined: Jan 2012
Posts: 48
Likes: 0
From: Bahrain
good luck
03-28-12 | 10:56 AM
#452
tommy installed my lights like oem.. all he did was tap the dark green wire into the acc fuse... it was really easy for him... my lights work like oem... its great, when you start the car the lights come on, and when you turn the car off they go off... you don't have to turn on your parking lights to make the leds light up... but do yourself a favor and go to your lexus dealership and get your drl's disabled, they look 10x better
OEM = 100% brightness when headlights are off, 50% brightness with headlights on.
Sounds like your lights were given a constant power source (acc), but if they are wired for 100% they will always be 100% brightness, even when the headlights are on.
03-28-12 | 12:09 PM
#454
03-28-12 | 12:55 PM
#457
Pole Position
Joined: Nov 2011
Posts: 250
Likes: 1
From: socal
Yes and no, not trying to rain on your parade but your lights still down work like OEM.
OEM = 100% brightness when headlights are off, 50% brightness with headlights on.
Sounds like your lights were given a constant power source (acc), but if they are wired for 100% they will always be 100% brightness, even when the headlights are on.
OEM = 100% brightness when headlights are off, 50% brightness with headlights on.
Sounds like your lights were given a constant power source (acc), but if they are wired for 100% they will always be 100% brightness, even when the headlights are on.
03-28-12 | 01:12 PM
#458
Sewell didn't make the lights. Lexus did. They can do both brightnesses, you just need to wire it to be like that.
You can be much, much more OEM if you really wanted to be.
Jeff
You can be much, much more OEM if you really wanted to be.
Jeff
03-28-12 | 06:20 PM
#464
Pole Position
Joined: Nov 2011
Posts: 250
Likes: 1
From: socal
i didn't take it offensively, i just didn't know that you were able to adjust the brightness, i was told that they came at 100%... i'm not to savy on the whole re-wiring to make them 50%, plus i think they look way better imo at 100% all the time.
03-28-12 | 06:51 PM
#465
I'd like to thank Darryl and the Sewell team for my lights which I received earlier this afternoon. I've only gone as far as installing spare ballast which I had laying around. The rest will be completed tomorrow 