What's your suggestion for my 350?
#17
Lexus Fanatic
iTrader: (1)
and the dyno #s he claimed in another thread would be higher than any that anybody has ever posted on here (well, ever posted and then provided any evidence of anyway), but he didn't reply to request for dyno sheet/details
So it's not so much touchy as, well, others have made a lot of claims over the years that they've been entirely unable to backup, and his claims exceed those of the folks who have actually backed their own up (HKS350 for example).
(it's also odd when someone says they dropped 15k in performance mods into a relatively new 350 rather than get an F)
But by all means, if he has the pics and dyno sheets to support the claims, there's quite a few folks who'd be very interested and I'd encourage him to provide the info- it could lead to some decent $/business for the tuner friends he said helped him with this.
So it's not so much touchy as, well, others have made a lot of claims over the years that they've been entirely unable to backup, and his claims exceed those of the folks who have actually backed their own up (HKS350 for example).
(it's also odd when someone says they dropped 15k in performance mods into a relatively new 350 rather than get an F)
But by all means, if he has the pics and dyno sheets to support the claims, there's quite a few folks who'd be very interested and I'd encourage him to provide the info- it could lead to some decent $/business for the tuner friends he said helped him with this.
#19
Lead Lap
iTrader: (2)
For coilovers i have the megan ez, but i would suggest the LP instead thats the cheapest running coilovers for the IS, will to spend more and drive comfortable BC and D2. I wouldnt call it destroy but it wont feel stock also depends on how low you go.
For lip kit my favorites or Ings and Vertex
Rims is a very long list but as most guys suggest on the forum u gotta have some "baller wheels" on a IS
For lip kit my favorites or Ings and Vertex
Rims is a very long list but as most guys suggest on the forum u gotta have some "baller wheels" on a IS
#20
Even if it were feasible, I don't understand the point of spending $15k to bring an IS350 up to ISF performance standards. Getting a brand new (or used) ISF from the get go makes far more financial sense, and if you're willing to spend a few grand on nitrous oxide/headers, you could've pushed your ISF into the ~450-500 whp range.
#21
Pole Position
Thread Starter
Join Date: Feb 2012
Location: Florida, Paris
Posts: 288
Likes: 0
Received 0 Likes
on
0 Posts
Even if it were feasible, I don't understand the point of spending $15k to bring an IS350 up to ISF performance standards. Getting a brand new (or used) ISF from the get go makes far more financial sense, and if you're willing to spend a few grand on nitrous oxide/headers, you could've pushed your ISF into the ~450-500 whp range.
1) Profile says 2011 IS 350 picts show different.
2) Whats been done to the IS 350 2007
3) Are you BSing me
4) Just a friendly guy who has picked up alot of hate
So to beging answering.
1) The picture above is of a 2007 IS 350 in which I purchased with 50K miles on it ruffly 2 months ago. I have multiple cars as working on cars has always been a hobby since a young kid. I also had a 2011 350 for about 3 weeks and sold it to a friend in exchange for some favors.
2) Whats been done, one of the favors was to get this older 350 to as close to 400HP which I was told would be very difficult but thought it could be done instead of getting the ISF. The ISF I wanted was $52,000 used and I got this 350 for $19,000 cash. I thought by saving alot of money we could make it ISF fast with spending around $25,000.
The things done so far - > Custom built intake, increased the size of the cylinders to increase displacement, reinforced the entire engine, F - Sport Sway bars front and rear, headers, new wiring, custom under chasis, Weight reduction - Spare removed, trunk inside removed, arm rest rebuilt, inside door panels removed and replaced with light weight plastic, passenger airbag removed, side airbags removed seats gutted and re-stuffed all accept drivers including rear. Griffin custom radiator (considered Supercharger), 4 customs fans, custom horns, reverse beep, Copper spark plugs, upgraded solenoids Upgraded Pump and injectors installed to run on spray and tuned. The NOS was not a regular cheap job each port was threaded specifically for the cylinder running a line to 6 individualy. We have experimented with multiple things so far including, Turbo, Supercharger, engine swap ect. Settled on no turbo or SC because weve seen a few others who've already done it and want to be different.
3) Doesn't make much since to BS anyone over a Forum. Once the car is finish you better believe picts will be posted. I've been to a few meets already and anyone who saw the whip then knows this isn't some Unicorn. Anywho I could care less what others believe. I love the 350
4) I hope this answers all questions as I wont be going over this anymore. Thanks everyone and cheers.
#23
Pole Position
Thread Starter
Join Date: Feb 2012
Location: Florida, Paris
Posts: 288
Likes: 0
Received 0 Likes
on
0 Posts
For coilovers i have the megan ez, but i would suggest the LP instead thats the cheapest running coilovers for the IS, will to spend more and drive comfortable BC and D2. I wouldnt call it destroy but it wont feel stock also depends on how low you go.
For lip kit my favorites or Ings and Vertex
Rims is a very long list but as most guys suggest on the forum u gotta have some "baller wheels" on a IS
For lip kit my favorites or Ings and Vertex
Rims is a very long list but as most guys suggest on the forum u gotta have some "baller wheels" on a IS
#24
Lexus Fanatic
iTrader: (1)
Thanks everyone, and sorry for previously not giving much info on the 2007. I hope to answer all questions as best as I can.
1) Profile says 2011 IS 350 picts show different.
2) Whats been done to the IS 350 2007
3) Are you BSing me
4) Just a friendly guy who has picked up alot of hate
So to beging answering.
1) The picture above is of a 2007 IS 350 in which I purchased with 50K miles on it ruffly 2 months ago. I have multiple cars as working on cars has always been a hobby since a young kid. I also had a 2011 350 for about 3 weeks and sold it to a friend in exchange for some favors.
2) Whats been done, one of the favors was to get this older 350 to as close to 400HP which I was told would be very difficult but thought it could be done instead of getting the ISF. The ISF I wanted was $52,000 used and I got this 350 for $19,000 cash. I thought by saving alot of money we could make it ISF fast with spending around $25,000.
The things done so far - > Custom built intake, increased the size of the cylinders to increase displacement, reinforced the entire engine, F - Sport Sway bars front and rear, headers, new wiring, custom under chasis, Weight reduction - Spare removed, trunk inside removed, arm rest rebuilt, inside door panels removed and replaced with light weight plastic, passenger airbag removed, side airbags removed seats gutted and re-stuffed all accept drivers including rear. Griffin custom radiator (considered Supercharger), 4 customs fans, custom horns, reverse beep, Copper spark plugs, upgraded solenoids Upgraded Pump and injectors installed to run on spray and tuned. The NOS was not a regular cheap job each port was threaded specifically for the cylinder running a line to 6 individualy. We have experimented with multiple things so far including, Turbo, Supercharger, engine swap ect. Settled on no turbo or SC because weve seen a few others who've already done it and want to be different.
3) Doesn't make much since to BS anyone over a Forum. Once the car is finish you better believe picts will be posted. I've been to a few meets already and anyone who saw the whip then knows this isn't some Unicorn. Anywho I could care less what others believe. I love the 350
4) I hope this answers all questions as I wont be going over this anymore. Thanks everyone and cheers.
1) Profile says 2011 IS 350 picts show different.
2) Whats been done to the IS 350 2007
3) Are you BSing me
4) Just a friendly guy who has picked up alot of hate
So to beging answering.
1) The picture above is of a 2007 IS 350 in which I purchased with 50K miles on it ruffly 2 months ago. I have multiple cars as working on cars has always been a hobby since a young kid. I also had a 2011 350 for about 3 weeks and sold it to a friend in exchange for some favors.
2) Whats been done, one of the favors was to get this older 350 to as close to 400HP which I was told would be very difficult but thought it could be done instead of getting the ISF. The ISF I wanted was $52,000 used and I got this 350 for $19,000 cash. I thought by saving alot of money we could make it ISF fast with spending around $25,000.
The things done so far - > Custom built intake, increased the size of the cylinders to increase displacement, reinforced the entire engine, F - Sport Sway bars front and rear, headers, new wiring, custom under chasis, Weight reduction - Spare removed, trunk inside removed, arm rest rebuilt, inside door panels removed and replaced with light weight plastic, passenger airbag removed, side airbags removed seats gutted and re-stuffed all accept drivers including rear. Griffin custom radiator (considered Supercharger), 4 customs fans, custom horns, reverse beep, Copper spark plugs, upgraded solenoids Upgraded Pump and injectors installed to run on spray and tuned. The NOS was not a regular cheap job each port was threaded specifically for the cylinder running a line to 6 individualy. We have experimented with multiple things so far including, Turbo, Supercharger, engine swap ect. Settled on no turbo or SC because weve seen a few others who've already done it and want to be different.
3) Doesn't make much since to BS anyone over a Forum. Once the car is finish you better believe picts will be posted. I've been to a few meets already and anyone who saw the whip then knows this isn't some Unicorn. Anywho I could care less what others believe. I love the 350
4) I hope this answers all questions as I wont be going over this anymore. Thanks everyone and cheers.
You missed the question about providing before/after dyno sheets. Ideally with AFRs too, as HKS350, running on race gas to avoid detonation, only managed an 80 shot safely (and picked up about 50 whp from it)
I suspect a lotta folks would be curious about this part too:
Stuff like where you got the pistons and other custom parts for it (because a number of people have tried, and been unable, to get such parts).... and what you're using for tuning, since that's been fairly elusive for the 2IS as well, especially tuning for the changes you're listing like changing the injectors and displacement.
Why? If you've really put all this money and time into the car, and gotten such great results, more power than anyone else ever has on an ISx50 engine, why would you want to quickly change the subject rather than discussing and sharing info on the build?
Last edited by Kurtz; 04-05-12 at 11:59 AM.
#26
Racer
iTrader: (2)
Thanks everyone, and sorry for previously not giving much info on the 2007. I hope to answer all questions as best as I can.
1) Profile says 2011 IS 350 picts show different.
2) Whats been done to the IS 350 2007
3) Are you BSing me
4) Just a friendly guy who has picked up alot of hate
So to beging answering.
1) The picture above is of a 2007 IS 350 in which I purchased with 50K miles on it ruffly 2 months ago. I have multiple cars as working on cars has always been a hobby since a young kid. I also had a 2011 350 for about 3 weeks and sold it to a friend in exchange for some favors.
2) Whats been done, one of the favors was to get this older 350 to as close to 400HP which I was told would be very difficult but thought it could be done instead of getting the ISF. The ISF I wanted was $52,000 used and I got this 350 for $19,000 cash. I thought by saving alot of money we could make it ISF fast with spending around $25,000.
The things done so far - > Custom built intake, increased the size of the cylinders to increase displacement, reinforced the entire engine, F - Sport Sway bars front and rear, headers, new wiring, custom under chasis, Weight reduction - Spare removed, trunk inside removed, arm rest rebuilt, inside door panels removed and replaced with light weight plastic, passenger airbag removed, side airbags removed seats gutted and re-stuffed all accept drivers including rear. Griffin custom radiator (considered Supercharger), 4 customs fans, custom horns, reverse beep, Copper spark plugs, upgraded solenoids Upgraded Pump and injectors installed to run on spray and tuned. The NOS was not a regular cheap job each port was threaded specifically for the cylinder running a line to 6 individualy. We have experimented with multiple things so far including, Turbo, Supercharger, engine swap ect. Settled on no turbo or SC because weve seen a few others who've already done it and want to be different.
3) Doesn't make much since to BS anyone over a Forum. Once the car is finish you better believe picts will be posted. I've been to a few meets already and anyone who saw the whip then knows this isn't some Unicorn. Anywho I could care less what others believe. I love the 350
4) I hope this answers all questions as I wont be going over this anymore. Thanks everyone and cheers.
1) Profile says 2011 IS 350 picts show different.
2) Whats been done to the IS 350 2007
3) Are you BSing me
4) Just a friendly guy who has picked up alot of hate
So to beging answering.
1) The picture above is of a 2007 IS 350 in which I purchased with 50K miles on it ruffly 2 months ago. I have multiple cars as working on cars has always been a hobby since a young kid. I also had a 2011 350 for about 3 weeks and sold it to a friend in exchange for some favors.
2) Whats been done, one of the favors was to get this older 350 to as close to 400HP which I was told would be very difficult but thought it could be done instead of getting the ISF. The ISF I wanted was $52,000 used and I got this 350 for $19,000 cash. I thought by saving alot of money we could make it ISF fast with spending around $25,000.
The things done so far - > Custom built intake, increased the size of the cylinders to increase displacement, reinforced the entire engine, F - Sport Sway bars front and rear, headers, new wiring, custom under chasis, Weight reduction - Spare removed, trunk inside removed, arm rest rebuilt, inside door panels removed and replaced with light weight plastic, passenger airbag removed, side airbags removed seats gutted and re-stuffed all accept drivers including rear. Griffin custom radiator (considered Supercharger), 4 customs fans, custom horns, reverse beep, Copper spark plugs, upgraded solenoids Upgraded Pump and injectors installed to run on spray and tuned. The NOS was not a regular cheap job each port was threaded specifically for the cylinder running a line to 6 individualy. We have experimented with multiple things so far including, Turbo, Supercharger, engine swap ect. Settled on no turbo or SC because weve seen a few others who've already done it and want to be different.
3) Doesn't make much since to BS anyone over a Forum. Once the car is finish you better believe picts will be posted. I've been to a few meets already and anyone who saw the whip then knows this isn't some Unicorn. Anywho I could care less what others believe. I love the 350
4) I hope this answers all questions as I wont be going over this anymore. Thanks everyone and cheers.
You act like any question on this topic is out of line or an imposition on you. How can you come onto a forum where hundreds of IS owners would love to do what you're talking about, then casually mention you've dropped $20k under the hood on doing things others have found impossible, then be surprised and offended when others ask for details?
People here don't just want proof or details for proof's sake, to prove you wrong for their own satisfaction. They want to know so they can learn and benefit from your knowledge. That's what forums like this are all about.
#27
Pole Position
Thread Starter
Join Date: Feb 2012
Location: Florida, Paris
Posts: 288
Likes: 0
Received 0 Likes
on
0 Posts
Well said Calvin, and I respect this answer. I don't mind answering a few questions and if I don't know the answer I will ask my buddies who do most of the work on it. Our initial wants for this was to keep is as quite as possible until complete and then we would reveal. I hope we still complete this task as it would be nice to finish a car you begin working on which somehow always seems to not happen when your primary job is not working on cars. We want to do more to the 350 and other models we have been working on and eventually establish something decently big in the Orlando Tuning market. Im out of town on an away and when we get back i'll try and get it on the dyno and take some picts. See how the guys feel about that... Enjoy your weekend CL.
Thread
Thread Starter
Forum
Replies
Last Post
Z3NK1
1Gen RC350 / RC-F Classifieds
2
04-12-17 08:55 AM
VDMTom
3Gen GS460 / 450H / 430 / 350 / 300 Classifieds (06-12)
10
02-24-13 01:04 PM