3M Headlight Restoration
#1
Pole Position
Thread Starter
Join Date: May 2007
Location: texas
Posts: 202
Likes: 0
Received 0 Likes
on
0 Posts
3M Headlight Restoration
Car: 2006 IS250
Problem: Headlight oxidation and hazy
Solution: http://solutions.3m.com/wps/portal/3...g_a_Headlight/
Est. Time: 45-1hour (considering this is my first time doing it)
Outcome: It works. Watched a youtube how-to video made it easy.
Problem: Headlight oxidation and hazy
Solution: http://solutions.3m.com/wps/portal/3...g_a_Headlight/
Est. Time: 45-1hour (considering this is my first time doing it)
Outcome: It works. Watched a youtube how-to video made it easy.
#3
Lexus Fanatic
iTrader: (1)
Very nice. Now get something like Meguairs Headlight protectant to keep them sealed from all that UV damage or the headlights won't stay like that for long. Looks like this...
Or you can just wax the headlights. I waxed mine constantly after I did the sanding method on my old car and they stayed like-new for a lot longer than people I know that just sanded it and left it.
Or you can just wax the headlights. I waxed mine constantly after I did the sanding method on my old car and they stayed like-new for a lot longer than people I know that just sanded it and left it.
#5
Super Moderator
Consumer Reports did a test of these in March. Their top pick was the Sylvania Headlight Restoration Kit. That kit doesn't require an electric drill, and comes with a UV blocking clear coat that is applied as the last step.
The 3M kit that dangp used was their second choice.
The 3M kit that dangp used was their second choice.
Last edited by Bichon; 04-09-12 at 04:37 AM.
Trending Topics
#9
If you use the 3M kit, skip the most abrasive pad. This is EXTREME overkill for a little haze. I would only use if you are trying to take out a deep scratch or gouge.
I did this to my G35. As noted above, it looked great and then fogged up right away...
I did this to my G35. As noted above, it looked great and then fogged up right away...
#12
Lexus Test Driver
iTrader: (4)
Just an observation, but it appears that the issue with your lights was oxidation, not major swirls or anything. If there are minor swirls and oxidation, it would have been better to just polish them instead of going the whole 9 yards. As a detailer, all I can say to anyone else is: always use the least abrasive step first
#13
Consumer Reports did a test of these in March. Their top pick was the Sylvania Headlight Restoration Kit. That kit doesn't require an electric drill, and comes with a UV blocking clear coat that is applied as the last step.
The 3M kit that dangp used was their second choice.
The 3M kit that dangp used was their second choice.
#15
Lead Lap
iTrader: (4)
Join Date: May 2011
Location: tx
Posts: 721
Likes: 0
Received 0 Likes
on
0 Posts
The tooth paste thing works great.
I have a door jam gun/touch up gun that I use to spray 2 coats of clear over the headlights after then are done. They look factory when done and last ultra long. My neighbors bring over their cars all the time for me to do theirs. I have used rattle can clear before. Works good just take your time cause it runs easily
I have a door jam gun/touch up gun that I use to spray 2 coats of clear over the headlights after then are done. They look factory when done and last ultra long. My neighbors bring over their cars all the time for me to do theirs. I have used rattle can clear before. Works good just take your time cause it runs easily