Emblems got stolen!!!!!!!!!
#46
Rookie
Thread Starter
Join Date: Aug 2011
Location: AB
Posts: 73
Likes: 0
Received 0 Likes
on
0 Posts
Naw it was just stuck on with 3m tape to start with. Once I bought the new wing I molded it so you can't ****** it off now. They didn't damage it when the stole it. They were even nice enough to leave the plastic squeegee tool and dental floss they used to remove the Wald wing lmao. Cops took it for finger printing
#47
Rookie
Thread Starter
Join Date: Aug 2011
Location: AB
Posts: 73
Likes: 0
Received 0 Likes
on
0 Posts
#52
Lead Lap
iTrader: (1)
Join Date: Sep 2007
Location: TX
Posts: 672
Likes: 0
Received 0 Likes
on
0 Posts
Hybrid emblem is off the CT200h (p/n#90975‑02228)
My IS350 is a Radar cruise model so the front emblem is also a smooth emblem. The front GS450h Radar cruise emblem worked on it. I think the guys who don't have Radar cruise (99% of you guys) can use the Radar cruise grille and CT200h emblem. The holes don't line up at all but you guys can get creative with some aluminum and custom hardware.
My lower trunk panel was removed and the holes were filled in and the entire panel was repainted. I did the same on my Integra GS-R years ago. It's pretty much my signature move with all my vehicles.
My IS350 is a Radar cruise model so the front emblem is also a smooth emblem. The front GS450h Radar cruise emblem worked on it. I think the guys who don't have Radar cruise (99% of you guys) can use the Radar cruise grille and CT200h emblem. The holes don't line up at all but you guys can get creative with some aluminum and custom hardware.
My lower trunk panel was removed and the holes were filled in and the entire panel was repainted. I did the same on my Integra GS-R years ago. It's pretty much my signature move with all my vehicles.
Thread
Thread Starter
Forum
Replies
Last Post