When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Thanks for the help, hopefully to clarify, these are the 3 wires for the reverse cam. I already have an aftermarket one wired into a standalone screen, but since i have this unit now, trying to wire it to the navi screen.
CCD Yellow RCA Input - Connected this to the RCA output on the camera
REVERSE wire (Blue) - Not sure what to do with this? should i ground or connect to 12v?
CCD + 12v wire - Not sure what to do with this either...
CCD Yellow RCA Input - Connected this to the RCA output on the camera That's correct
REVERSE wire (Blue) - Not sure what to do with this? should i ground or connect to 12v? This is the signal wire that tell the unit to switch to the reverse camera input. Connect this wire to the positive on the reverse lights
CCD + 12v wire - Not sure what to do with this either... This is the power source for the camera, connect the positive to the positive on the reverse lights as wire as the signal wire and the negative to the negative on the reverse lights
Alright all those that have purchased this unit I need some help. I need an MCU update for my unit and the only way to get this is to contact the supplier, the problem is the person I have been in contact with no longer responds to my emails. Could any of you try to contact the person you purchased your unit through and see if you can get a MCU update file for your unit please? The file type is s19 or .s19. Thanks
Has anyone got some custom skins / themes ?
the 3 standard ones are sooo ugly
this is my startup logo if anyone wants, great quality
I spent some time trying to alter the original images, I agree with you they are very dated/ugly.
Unfortunately, I didn't get too far, I need to spend more time.
Nice logo by the way, thanks. I'll post some menu files during the weekend.