Brake Light LED on Roof Spoiler for ISX50
#1
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
I've seen only 2-3 main roof spoilers for our IS's but was wondering has anyone ever done a custom setup where the 3rd brake light is built into the actual roof spoiler for the sleek clean look? It would look real classy and disable the oem 3rd brake light and have no cutout for the tint on the back windshield. If its possible, how so...I'll be the guinea pig for this one
, below are pictures of examples of what I'm trying to achieve
![Stick Out Tongue](https://www.clublexus.com/forums/images/smilies/tongue.gif)
![Thumb Up](https://www.clublexus.com/forums/images/smilies/thumbsup.gif)
#5
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
LMAOOOO^^^^^ im wondering if I can get a roof spoiler off another car that has it built already, im going to start measuring the back windshield and see the dimentions and see how I can run the power. This looks like a job for RDIS250 since hes the DIY King !!!!
Trending Topics
#12
Pole Position
iTrader: (32)
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
I was taking a look at the back window area and the only way I can see doing it (without poking a hole around the window) is to run a small wire in the channel on either side of the window. Then, into the trunk and finish your wiring to the brake lights.
The wire would need to be just the right side to press-in snugly into the channel so it doesn't move around or come out. The channel looks pretty deep so I don't think that it'll be that noticeable unless you're looking for it.
Drilling a hole and sealing it with silicone just seems like a bad idea. I'm sure it can be done and looks cleaner but you have to be 100% sure that it's sealed up. And just like with headlights, you never know until you get a leak inside.
I didn't take a look inside the trunk so I can't really tell if a hole needs to be drilled in there. Maybe someone can chime in on this.
It'll be interesting to find out other ideas on this as well.
The wire would need to be just the right side to press-in snugly into the channel so it doesn't move around or come out. The channel looks pretty deep so I don't think that it'll be that noticeable unless you're looking for it.
Drilling a hole and sealing it with silicone just seems like a bad idea. I'm sure it can be done and looks cleaner but you have to be 100% sure that it's sealed up. And just like with headlights, you never know until you get a leak inside.
I didn't take a look inside the trunk so I can't really tell if a hole needs to be drilled in there. Maybe someone can chime in on this.
It'll be interesting to find out other ideas on this as well.
#13
Racer
iTrader: (7)
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
I was taking a look at the back window area and the only way I can see doing it (without poking a hole around the window) is to run a small wire in the channel on either side of the window. Then, into the trunk and finish your wiring to the brake lights.
The wire would need to be just the right side to press-in snugly into the channel so it doesn't move around or come out. The channel looks pretty deep so I don't think that it'll be that noticeable unless you're looking for it.
Drilling a hole and sealing it with silicone just seems like a bad idea. I'm sure it can be done and looks cleaner but you have to be 100% sure that it's sealed up. And just like with headlights, you never know until you get a leak inside.
I didn't take a look inside the trunk so I can't really tell if a hole needs to be drilled in there. Maybe someone can chime in on this.
It'll be interesting to find out other ideas on this as well.
The wire would need to be just the right side to press-in snugly into the channel so it doesn't move around or come out. The channel looks pretty deep so I don't think that it'll be that noticeable unless you're looking for it.
Drilling a hole and sealing it with silicone just seems like a bad idea. I'm sure it can be done and looks cleaner but you have to be 100% sure that it's sealed up. And just like with headlights, you never know until you get a leak inside.
I didn't take a look inside the trunk so I can't really tell if a hole needs to be drilled in there. Maybe someone can chime in on this.
It'll be interesting to find out other ideas on this as well.
That's what I was thinking of doing it. I looked into it further and the way the LS has it done is that the LED assembly actually sits in a channel on the LS which lets you run the wife inside the car and sealing it with a grommet.
However since the IS has no such Chanel the only other solution would be to run a small gauge wire and running on the side of the glass along the edge of the glass and the pillar. However doing this would leave the wire exposed to the elements and I would not be happy with that.